查看Xen on Hikey960的源代码 Xen on Hikey960 0

Reference: https://wiki.xenproject.org/wiki/HiKey960

1. Building UEFI
 export BUILD_PATH=~/build
 cd ${BUILD_PATH}
download tools-images-hikey960
 git clone https://github.com/96boards-hikey/tools-images-hikey960
 cd tools-images-hikey960

see README-flash-uefi.md to install ser2net first.
參考 recovery-flash-uefi-prebuilt.sh 分成三步驟
(1) download prebuild from 
https://snapshots.linaro.org/reference-platform/components/uefi-staging/${VERSION}/hikey960/${RELEASE}/

BASE_URL=https://snapshots.linaro.org/reference-platform/components/uefi-staging
VERSION=latest
PRODUCT=hikey960
RELEASE=release
DEVICE=/dev/ttyUSB1
UEFI_URL=${BASE_URL}/${VERSION}/${PRODUCT}/${RELEASE}/
 mkdir -p ./uefi
 cd uefi
 wget -A bin,config,efi,hikey_idt,img,txt -m -nd -np "$UEFI_URL"

(2) change board to recovery mode (沒成功)
download hikey_idt hisi-sec_usb_xloader.img, hisi-sec_uce_boot.img, hisi-sec_fastboot.img
 sudo ./hikey_idt -c config -p ${DEVICE}


(3) change board to fastboot mode
 sudo fastboot flash ptable prm_ptable.img
 sudo fastboot flash xloader hisi-sec_xloader.img (無法寫入)
 sudo fastboot flash fastboot l-loader.bin
 sudo fastboot flash fip fip.bin

Switch to normal mode, power on
[[image:Uefi_boot.png]]
 
xxx2. Download boot and system image
boot - The FAT32 64MB partition containing GRUB (or xen.efi if desired)
system - The rootfs (Ext4) containing the OS and /boot directory for GRUB to search.

try this:(NO HIKEY960)
https://snapshots.linaro.org/reference-platform/embedded/morty/hikey/latest/rpb/


download rootfs from
 rpb-console-image-hikey960-<some number>.rootfs.img.gz
download uefi boot
boot-0.0+AUTOINC+<some number>hikey960-<some number>.uefi.img 

2. Building Linux
 git clone https://github.com/96boards-hikey/linux.git
 cd linux
 git checkout origin/hikey960-upstream-rebase
 export CROSS_COMPILE=aarch64-linux-gnu-
 export ARCH=arm64
 make defconfig
check .config,  CONFIG_XEN_DOM0=y CONFIG_XEN=y
 make -j8
 cp -f arch/$ARCH/boot/Image ../Image
 cp -f arch/$ARCH/boot/dts/hisilicon/hi3660-hikey960.dtb ../Image.dtb

3. Building Xen
 git clone git://xenbits.xen.org/xen.git
 cd xen/xen
 export TOOLS=/opt/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu/bin
 export CROSS_COMPILE=${TOOLS}/aarch64-linux-gnu-
 export ARCH=arm64
 export XEN_TARGET_ARCH=arm64
 make defconfig
 make -j8
 cp xen.efi ../../

4. Extract the wl18xx-fw-4.bin so your WiFi will work
 git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
 cd linux-firmware
 cp ti-connectivity/wl18xx-fw-4.bin ../

5. Building GRUB
Pre-requirement:
 sudo apt-get install autoconf automake libtool autopoint
5.1 Make 
 git clone  https://git.savannah.gnu.org/git/grub.git
 cd grub
 ./bootstrap => autoconf->autogen.sh=>configure
 export CROSS_COMPILE=aarch64-linux-gnu-
 export ARCH=arm64
 ./configure --prefix=/usr --target=aarch64-linux-gnu --with-platform=efi
 make
 mkdir ../grub-install
 make DESTDIR=`pwd`/../grub-install install
 cd ../

How to make cross compile?

5.2 create grubaa64.efi


6. rootfs
check https://releases.linaro.org/debian/images/developer-arm64/latest/

 wget https://releases.linaro.org/debian/images/developer-arm64/latest/linaro-stretch-developer- 20170720-71.tar.gz
 sudo tar -xzf linaro-stretch-developer-20180416-89.tar.gz
 sudo mv binary rootfs
 sudo cp Image rootfs/boot
 sudo cp Image.dtb rootfs/boot
 sudo cp xen.efi rootfs/boot
 sudo mkdir -p rootfs/lib/firmware/ti-connectivity
 sudo cp wl18xx-fw-4.bin rootfs/lib/firmware/ti-connectivity

create image
 mkdir loop
 dd if=/dev/zero of=rootfs.img bs=1M count=2096
 mkfs.ext4 -F -L rootfs rootfs.img #kernel use the label rootfs to mount the rootfs as /
 sudo mount -o loop rootfs.img loop
 cd rootfs
 sudo tar -cf - * | (cd ../loop;sudo tar -xf - )
 sudo umount loop
 img2simg rootfs.img rootfs.sparse.img 4096

7. Update boot.img

8. Flash boot.img and system.img