“Android: Startup mouse not found debug”的版本间的差异 Android: Startup mouse not found debug 0

2019年9月28日 (六) 14:35的最后版本

Normal situation, when plug mouse receiver:

[  274.717740] usb 1-1.1: new full-speed USB device number 4 using xhci-hcd
[  274.827156] init: Received control message 'start' for 'setup-bcb' from pid: 2757 (system_server)
[  274.827871] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
[  274.836911] init: starting service 'setup-bcb'...
[  274.843065] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  274.843077] usb 1-1.1: Product: USB Receiver
[  274.859552] usb 1-1.1: Manufacturer: Logitech
[  274.879222] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[  274.956738] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input0
[  275.102236] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[  275.179221] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input1

Plug before power on

[ 7.553376] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd 
[ 7.677225] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534 
[ 7.684119] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 
[ 7.691442] usb 1-1.1: Product: USB Receiver 
[ 7.695712] usb 1-1.1: Manufacturer: Logitech 
[ 7.714407] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1 
[ 7.759259] ueventd: ueventd started! 
[ 7.801696] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0 
[ 7.817673] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2 
[ 7.835109] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1 

completed bootlog:

er mo@
` 2▒▒ҚѽɅ▒▒}ɕ▒▒▒fail[-1]
reboot_reason: reboot_reason is AP_S_COLDBOOT
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get coul_type failed!
power: get coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 0
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
misc: [get_misc_message] mmc_read failed
preboot: [fastboot]: check_unlock_misc_info, line:1273 :get misc message failed.
preboot: [fastboot]: check_powerkey_misc_info, line:1242 :!!!!CAUTION!!!!:get keypad_operator FAIL!
preboot: [fastboot]: check_volumekey_state, line:943 :!!!!CAUTION!!!!:get keypad_operator FAIL!
misc: [get_misc_message] mmc_read failed
preboot: [fastboot]: comm_read_misc_cmd, line:501 :get misc message failed.
power: [check_battery_present]:g_coulometer_ops is null
power: [wait_coulometer_work]:g_coulometer_ops is null
power: [get_device_power_state]:initial coulometer fail!
preboot: [fastboot]: preboot_init, line:1480 :Hikey960 stub: set bootmode to normal_mode!
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 1
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010004, mntnStageCode is 33
bfm: : <<<<<exit set_boot_stage.
load_lpm3: start lpm3 loading
load_lpm3: load lpmcu image
tm: cluster0 prof0 trim result check fail:0,00000000,00000000
tm: cluster0 prof1 trim result check fail:0,00000000,00000000
tm: cluster0 prof2 trim result check fail:0,00000000,00000000
tm: cluster0 prof3 trim result check fail:0,00000000,00000000
tm: cluster0 prof4 trim result check fail:0,00000000,00000000
tm: cluster1 prof0 trim result check fail:0,00000000,00000000
tm: cluster1 prof1 trim result check fail:0,00000000,00000000
tm: cluster1 prof2 trim result check fail:0,00000000,00000000
tm: cluster1 prof3 trim result check fail:0,00000000,00000000
tm: cluster1 prof4 trim result check fail:0,00000000,00000000
tm: cluster1 prof5 trim result check fail:0,00000000,00000000
tm: cluster2 prof0 trim result check fail:0,00000000,00000000
tm: cluster2 prof1 trim result check fail:0,00000000,00000000
tm: cluster2 prof2 trim result check fail:0,00000000,00000000
tm: cluster2 prof3 trim result check fail:0,00000000,00000000
tm: cluster2 prof4 trim result check fail:0,00000000,00000000
tm: cluster2 prof5 trim result check fail:0,00000000,00000000
tm: cluster2 prof6 trim result check fail:0,00000000,00000000
tm: cluster2 prof7 trim result check fail:0,00000000,00000000
tm: C0
tm: p4
tm: path adjust:00000018
tm: svfd2:00000011
tm: svfd1:00000012
tm: svfd0:00000011
tm: p3
tm: svfd2:00000011
tm: svfd1:00000011
tm: svfd0:00000011
tm: C1
tm: p4
tm: path adjust:00000018
tm: svfd2:00000014
tm: svfd1:00000014
tm: svfd0:00000014
tm: p3
tm: svfd2:00000017
tm: svfd1:00000017
tm: svfd0:00000017
tm: p2
tm: svfd2:0000001a
tm: svfd1:0000001a
tm: svfd0:0000001a
tm: p1
tm: svfd2:0000001a
tm: svfd1:0000001a
tm: svfd0:0000001a
load_lpm3: do_lpnv_acpufreq_papa_option
load_lpm3: modify_pmu6422_para no bugfix
load_lpm3: LPM3 load success 0x89c80000
load_lpm3: SCPERRSTSTAT4_SEC fffffffc
load_lpm3: SCOCBCRSTCTRL 00000000
load_lpm3: SCPERCLKEN2 43e00001
load_lpm3: SCPERSTAT2 c7fa4c4f
load_lpm3: SCOCBCSTAT 00007250
load_lpm3: AOCLK_CTRL 00000725
load_lpm3: SCPERSTAT3 000014c7
load_lpm3: SCOCBCSTAT 00007250
load_lpm3: AOCLK_CTRL 00000725
load_lpm3: AOCLK_CTRL 00000225
load_lpm3: CFG_M3_RST_STA 00000000
load_lpm3: load ocbc success!
load_kernel: 0xC5 = 00000032
load_kernel: 0xCC = 00000003
bfm: : bfm system is disabled!
load_kernel: load_kernel CONFIG_WITHOUT_SECURE_OS is open
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010005, mntnStageCode is 34
bfm: : <<<<<exit set_boot_stage.
bfm: : bfm system is disabled!
load_kernel: is_system_damaged, the system verify is 1 in nvme!
mntn_err: can not get gui_ops!
dtimage: -----can not find gpio-leds_v2 node by compatible
led: ERROR: Cannot update gpio-leds_v2 info
load_kernel: update dt for led err
load_kernel: update dt for led suc
usb: [usb]usb update hisilicon,gpio_hubv2 info success
load_kernel: update dt for usb suc
load_kernel: Hikey960: Enable all ip regulator
pmu_ip: Hikey960:switch from PPLL0 to PPLL3
pmu_ip: Hikey960:Enable ispfunc
pmu_ip: Hikey960:Enable clock-gating
pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010006, mntnStageCode is 35
bfm: : <<<<<exit set_boot_stage.
load_kernel: __get_cmdline: can not get audio_codec_ops!
power: [get_coulometer_nv_address]:g_coulometer_ops is null
power: [get_battery_voltage]:g_coulometer_ops is null
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
pasr: info: ddr_die=2048M@0M ddr_die=2048M@2048M
cmdline: create_last_bootup_keypoint_cmdline,last_bootup_keypoint is invalid
cmdline: g_memdump_addr is 0
dtimage: -----can not find hisilicon,fastboot node by compatible
cmdline: bsp_need_loadmodem: getU32byCompatible hisilicon,fastboot, is_fpga failed!
cmdline: [ddr]: cmdline add ddr_density 0x00000002!
no_module: create_mdmlog_cmdline: ret = 0 or nve bit[0] = 48, would't create cmdline!!
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
cmdline: can not get display_info!
reboot_reason: set_reboot_type is 0x000000ff.
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [mntnops_before_boot_kernel]: getU32byCompatible error!
mntn: apwatchdog_status_is_ok: cannot find amba/watchdog0, ret=-1
watchdog: Disable watchdog start
ddr: current logic version is lpddr4 verison !!!
mem_cfg: memory section - 0000000000000000 : 0000000080000000 -
mem_cfg: memory section + 0000000000000000 : 0000000080000000 +
mem_cfg: memory section - 0000000080000000 : 0000000080000000 -
mem_cfg: memory section + 0000000080000000 : 0000000060000000 +
mem_cfg: memory section + 0000000200000000 : 0000000020000000 +
mem_cfg: Could not find /reserved-memory/ddr-training2.
mem_cfg: update_sec_mem_bl31_ddrc_info: Could not find path /reserved-memory/hisi_cma.
mem_cfg: update_bl31_ddrc_info: secmem return wrong,may not a failure.
mem_cfg: update_fastboot_cma_bl31_ddrc_info: base 0x0000000016c00003 size 0x0000000004000000
usbloader: iddq is 0x0000000000000000
usbloader: hpm is 0x0000000000000000
usbloader: dieid is 0x0a048009d1170d0a8308c7122100ef1c06d65993
load_kernel: Hikey960: Enable all ip regulator
pmu_ip: Hikey960:switch from PPLL0 to PPLL3
pmu_ip: Hikey960:Enable ispfunc
pmu_ip: Hikey960:Enable clock-gating
pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
load_kernel:

load_kernel: boot_from_bl31: boot to trusted firmware. addr=0x00000000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.101-g56136f5a7cad (android-build@abfarm772) (Android (5271481 based on r349610) clang version 8.0.8 (https://android.googlesource.com/toolchain/clang 4dba9ad555eabb40b39dc53c12d09423e9faea7b) (https://android.googlesource.com/toolchain/llvm ab552995647d484a712bf15f77e6c6f4e8ac532b) (based on LLVM 8.0.8svn)) #1 SMP PREEMPT Wed Mar 27 01:29:07 UTC 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: HiKey960
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000020c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 1048063
[ 0.000000] DMA zone: 14328 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 916991 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x46c with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc21feea000 s55960 r8192 d30056 u94208
[ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031687
[ 0.000000] Kernel command line: androidboot.hardware=hikey960 firmware_class.path=/vendor/firmware efi=noruntime init=/init androidboot.boot_devices=soc/ff3b0000.ufs loglevel=15 overlay_mgr.overlay_dt_entry=hardware_cfg_enable_android_fstab buildvariant=userdebug androidboot.swtype=normal fastboot_version=DailyBuild_201806141701_FASTBOOT setup_logctl=1 fastbootdmd=0 enter_recovery=0 androidboot.mode=normal low_volt_flag=1 boardid=0x000014b5 normal_reset_type=coldboot ddr_die=2048M@0M ddr_die=2048M@2048M efuse_status=2 androidboot.serialno=4895095250000000 himntn=111111111111111010111111101001100010001 boot_slice=0x0001aa3c reboot_reason=AP_S_COLDBOOT recovery_update=0 userlock=locked bootlock=unlocked hw_bfm_enable=0 ddr_density=2 swiotlb=2 mdmreglogbase=0x00000000 mdmreglogsize=0x00000000 modem_socp_enable=0 androidboot.hardware=HiKey960 androidboot.veritymode=enforcing androidboot.verifiedbootstate=ORANGE ufs_product_name=hB8aL1 format_data=1 cpu_buck_reg=0x;; androidboot.ddrsize=4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xdffbf000-0xdffff000] (0MB)
[ 0.000000] Memory: 3945872K/4192252K available (13884K kernel code, 1370K rwdata, 4544K rodata, 3136K init, 912K bss, 115308K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e10000 ( 13888 KB)
[ 0.000000] .rodata : 0xffffff8008e10000 - 0xffffff8009290000 ( 4608 KB)
[ 0.000000] .init : 0xffffff8009290000 - 0xffffff80095a0000 ( 3136 KB)
[ 0.000000] .data : 0xffffff80095a0000 - 0xffffff80096f6a00 ( 1371 KB)
[ 0.000000] .bss : 0xffffff80096f6a00 - 0xffffff80097daa18 ( 913 KB)
[ 0.000000] fixed  : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf08800000 ( 136 MB actual)
[ 0.000000] memory  : 0xffffffc000000000 - 0xffffffc220000000 ( 8704 MB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000006] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.000100] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
[ 0.000697] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.000708] pid_max: default: 32768 minimum: 301
[ 0.000834] Security Framework initialized
[ 0.000847] SELinux: Initializing.
[ 0.000901] SELinux: Starting in permissive mode
[ 0.001000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001019] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016038] ASID allocator initialised with 32768 entries
[ 0.024017] Hierarchical SRCU implementation.
[ 0.032860] EFI services will not be available.
[ 0.040055] smp: Bringing up secondary CPUs ...
[ 0.068595] Detected VIPT I-cache on CPU1
[ 0.068681] CPU1: Booted secondary processor [410fd034]
[ 0.096520] Detected VIPT I-cache on CPU2
[ 0.096549] CPU2: Booted secondary processor [410fd034]
[ 0.124533] Detected VIPT I-cache on CPU3
[ 0.124554] CPU3: Booted secondary processor [410fd034]
[ 0.154131] CPU features: enabling workaround for ARM erratum 858921
[ 0.154136] Detected VIPT I-cache on CPU4
[ 0.154144] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
[ 0.154152] CPU features: Unsupported CPU feature variation detected.
[ 0.154165] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.154177] arch_timer: CPU4: Trapping CNTVCT access
[ 0.154183] CPU4: Booted secondary processor [410fd091]
[ 0.180557] Detected VIPT I-cache on CPU5
[ 0.180563] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
[ 0.180572] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.180577] arch_timer: CPU5: Trapping CNTVCT access
[ 0.180581] CPU5: Booted secondary processor [410fd091]
[ 0.208599] Detected VIPT I-cache on CPU6
[ 0.208604] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
[ 0.208614] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.208619] arch_timer: CPU6: Trapping CNTVCT access
[ 0.208623] CPU6: Booted secondary processor [410fd091]
[ 0.236641] Detected VIPT I-cache on CPU7
[ 0.236646] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
[ 0.236655] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.236660] arch_timer: CPU7: Trapping CNTVCT access
[ 0.236664] CPU7: Booted secondary processor [410fd091]
[ 0.236733] smp: Brought up 1 node, 8 CPUs
[ 0.236782] SMP: Total of 8 processors activated.
[ 0.236790] CPU features: detected feature: 32-bit EL0 Support
[ 0.236794] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.239515] CPU: All CPU(s) started at EL1
[ 0.239543] alternatives: patching kernel code
[ 0.239797] CPU7: update max cpu_capacity 1024
[ 0.244626] CPU3: update max cpu_capacity 592
[ 0.246474] Registered cp15_barrier emulation handler
[ 0.246486] Registered setend emulation handler
[ 0.246622] CPU5: update max cpu_capacity 1024
[ 0.246660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.246671] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.247969] xor: measuring software checksum speed
[ 0.284403] 8regs  : 5019.000 MB/sec
[ 0.324433] 8regs_prefetch: 4600.000 MB/sec
[ 0.364464] 32regs  : 5624.000 MB/sec
[ 0.404495] 32regs_prefetch: 5445.000 MB/sec
[ 0.404500] xor: using function: 32regs (5624.000 MB/sec)
[ 0.404510] pinctrl core: initialized pinctrl subsystem
[ 0.405153] DMI not present or invalid.
[ 0.405378] NET: Registered protocol family 16
[ 0.405701] schedtune: configured to support 5 boost groups
[ 0.408766] cpuidle: using governor ladder
[ 0.408829] cpuidle: using governor menu
[ 0.409043] vdso: 2 pages (1 code @ ffffff8008e17000, 1 data @ ffffff80095a4000)
[ 0.409050] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.409651] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.409741] Serial: AMBA PL011 UART driver
[ 0.409934] pstore: using zlib compression
[ 0.410300] console [pstore-1] enabled
[ 0.410305] pstore: Registered ramoops as persistent store backend
[ 0.410311] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
[ 0.431463] hi3660-mbox e896b000.mailbox: Mailbox enabled
[ 0.432172] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
[ 0.432299] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
[ 0.432416] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
[ 0.444924] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.512703] raid6: int64x1 gen() 1291 MB/s
[ 0.580718] raid6: int64x1 xor() 773 MB/s
[ 0.648799] raid6: int64x2 gen() 1719 MB/s
[ 0.716847] raid6: int64x2 xor() 1001 MB/s
[ 0.784906] raid6: int64x4 gen() 1934 MB/s
[ 0.852966] raid6: int64x4 xor() 1100 MB/s
[ 0.921020] raid6: int64x8 gen() 1739 MB/s
[ 0.989043] raid6: int64x8 xor() 1057 MB/s
[ 1.057115] raid6: neonx1 gen() 2041 MB/s
[ 1.125156] raid6: neonx1 xor() 1923 MB/s
[ 1.193216] raid6: neonx2 gen() 2983 MB/s
[ 1.261256] raid6: neonx2 xor() 2803 MB/s
[ 1.329304] raid6: neonx4 gen() 4182 MB/s
[ 1.397359] raid6: neonx4 xor() 3549 MB/s
[ 1.465411] raid6: neonx8 gen() 4492 MB/s
[ 1.533467] raid6: neonx8 xor() 3465 MB/s
[ 1.533472] raid6: using algorithm neonx8 gen() 4492 MB/s
[ 1.533477] raid6: .... xor() 3465 MB/s, rmw enabled
[ 1.533483] raid6: using neon recovery algorithm
[ 1.533697] ACPI: Interpreter disabled.
[ 1.534209] vgaarb: loaded
[ 1.534526] SCSI subsystem initialized
[ 1.534663] libata version 3.00 loaded.
[ 1.534732] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
[ 1.534756] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
[ 1.534911] usbcore: registered new interface driver usbfs
[ 1.534939] usbcore: registered new interface driver hub
[ 1.535001] usbcore: registered new device driver usb
[ 1.535016] tcpc_class_init_1.1.1_G
[ 1.535029] TCPC class init OK
[ 1.535039] Init Richtek RegMap
[ 1.535117] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
[ 1.535138] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
[ 1.535157] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
[ 1.535198] Linux video capture interface: v2.00
[ 1.535432] dmi: Firmware registration failed.
[ 1.535498] overlay_mgr: apply hardware_cfg_enable_android_fstab dt entry
[ 1.535571] overlay_mgr: overlay_0 overlay applied
[ 1.535907] Advanced Linux Sound Architecture Driver Initialized.
[ 1.536143] Bluetooth: Core ver 2.22
[ 1.536167] NET: Registered protocol family 31
[ 1.536172] Bluetooth: HCI device and connection manager initialized
[ 1.536180] Bluetooth: HCI socket layer initialized
[ 1.536186] Bluetooth: L2CAP socket layer initialized
[ 1.536209] Bluetooth: SCO socket layer initialized
[ 1.536405] NetLabel: Initializing
[ 1.536410] NetLabel: domain hash size = 128
[ 1.536415] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.536448] NetLabel: unlabeled traffic allowed by default
[ 1.536818] clocksource: Switched to clocksource arch_sys_counter
[ 1.581074] VFS: Disk quotas dquot_6.6.0
[ 1.581123] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.581383] pnp: PnP ACPI: disabled
[ 1.581857] NET: Registered protocol family 2
[ 1.582160] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.582279] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.582471] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.582544] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.582573] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.582730] NET: Registered protocol family 1
[ 1.582748] PCI: CLS 0 bytes, default 128
[ 1.582883] Trying to unpack rootfs image as initramfs...
[ 1.602432] Freeing initrd memory: 776K
[ 1.603371] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.603557] kvm [1]: HYP mode not available
[ 1.605786] audit: initializing netlink subsys (disabled)
[ 1.605894] audit: type=2000 audit(1.599:1): state=initialized audit_enabled=0 res=1
[ 1.606111] Initialise system trusted keyrings
[ 1.606214] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.606737] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.606757] Registering sdcardfs 0.1
[ 1.606855] fuse init (API version 7.26)
[ 1.606954] 9p: Installing v9fs 9p2000 file system support
[ 1.607093] SELinux: Registering netfilter hooks
[ 1.609804] Key type asymmetric registered
[ 1.609811] Asymmetric key parser 'x509' registered
[ 1.609824] io scheduler noop registered
[ 1.609853] io scheduler cfq registered (default)
[ 1.609858] io scheduler mq-deadline registered
[ 1.609864] io scheduler kyber registered
[ 1.610545] pinctrl-single e896c000.pinmux: 124 pins at pa ffffff8009965000 size 496
[ 1.610717] pinctrl-single ff37e000.pinmux: 6 pins at pa ffffff800996d000 size 24
[ 1.610813] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffffff8009975000 size 48
[ 1.610899] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffffff800997d000 size 24
[ 1.611014] pinctrl-single fff11000.pinmux: 42 pins at pa ffffff8009985000 size 168
[ 1.611202] pinctrl-single e896c800.pinmux: 128 pins at pa ffffff800998d800 size 512
[ 1.611288] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffffff8009995800 size 24
[ 1.611378] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffffff800999d800 size 24
[ 1.611460] pinctrl-single ff37e800.pinmux: 6 pins at pa ffffff80099a5800 size 24
[ 1.611581] pinctrl-single fff11800.pinmux: 47 pins at pa ffffff80099ad800 size 188
[ 1.611889] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
[ 1.612014] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
[ 1.612141] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
[ 1.612266] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
[ 1.612384] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
[ 1.612504] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
[ 1.612623] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
[ 1.612752] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
[ 1.612890] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
[ 1.613129] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
[ 1.613368] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
[ 1.613601] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
[ 1.613839] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
[ 1.614071] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
[ 1.614307] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
[ 1.614544] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
[ 1.614769] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
[ 1.615002] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
[ 1.615247] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
[ 1.615496] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
[ 1.615730] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
[ 1.615971] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
[ 1.616204] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
[ 1.616442] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
[ 1.616671] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
[ 1.616955] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
[ 1.617192] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
[ 1.617427] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
[ 1.617648] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
[ 1.652865] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
[ 1.652879] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
[ 2.659400] kirin-pcie f4000000.pcie: Link Fail
[ 2.659518] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
[ 2.659529] pci_bus 0000:00: root bus resource [bus 00-01]
[ 2.659537] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
[ 2.659570] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
[ 2.659618] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 2.659712] pci 0000:00:00.0: supports D1 D2
[ 2.659718] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.659968] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
[ 2.660012] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff 64bit]
[ 2.660032] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.660267] pcieport 0000:00:00.0: Signaling PME with IRQ 69
[ 2.660414] pcieport 0000:00:00.0: AER enabled with IRQ 69
[ 2.663224] k3-dma fdf30000.dma: initialized
[ 2.663312] k3-dma e804b000.dma-controller: dma-avail-chan doesn't exist, considering all as available.
[ 2.665005] k3-dma e804b000.dma-controller: initialized
[ 2.665324] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.666391] [drm] +.
[ 2.666411] [drm] wait for external HDMI bridge driver.
[ 2.666600] mali e82c0000.mali: Continuing without Mali regulator control
[ 2.666903] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
[ 2.667379] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 2.667679] mali e82c0000.mali: Probed as mali0
[ 2.671398] brd: module loaded
[ 2.672857] Error reading temperature for gpu thermal zone: -22
[ 2.674954] loop: module loaded
[ 2.675179] [I/GPIO_HUB] gpio_hub_probe: step in
[ 2.675336] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
[ 2.676712] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 2.676723] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 2.676731] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 2.676738] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 2.698184] scsi host0: ufshcd
[ 2.709574] libphy: Fixed MDIO Bus: probed
[ 2.709581] tun: Universal TUN/TAP device driver, 1.6
[ 2.709825] PPP generic driver version 2.4.2
[ 2.709875] PPP BSD Compression module registered
[ 2.709881] PPP Deflate Compression module registered
[ 2.709910] PPP MPPE Compression module registered
[ 2.709916] NET: Registered protocol family 24
[ 2.709920] PPTP driver version 0.8.5
[ 2.710094] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 2.710146] usbcore: registered new interface driver pegasus
[ 2.710170] usbcore: registered new interface driver rtl8150
[ 2.710197] usbcore: registered new interface driver r8152
[ 2.710223] usbcore: registered new interface driver asix
[ 2.710246] usbcore: registered new interface driver ax88179_178a
[ 2.710269] usbcore: registered new interface driver cdc_ether
[ 2.710290] usbcore: registered new interface driver dm9601
[ 2.710316] usbcore: registered new interface driver CoreChips
[ 2.710343] usbcore: registered new interface driver smsc75xx
[ 2.710370] usbcore: registered new interface driver smsc95xx
[ 2.710393] usbcore: registered new interface driver net1080
[ 2.710415] usbcore: registered new interface driver plusb
[ 2.710436] usbcore: registered new interface driver cdc_subset
[ 2.710458] usbcore: registered new interface driver zaurus
[ 2.710480] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 2.710509] usbcore: registered new interface driver cdc_ncm
[ 2.710726] [USB3][hisi_dwc3_probe]+
[ 2.710844] [USB3][get_phy_param]eye diagram param: 0x1c466e3
[ 2.710850] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
[ 2.710856] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
[ 2.710861] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
[ 2.710866] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
[ 2.710886] [USB3][get_resource]this is asic platform (fpga flag 0)
[ 2.710891] [USB3][create_attr_file]+
[ 2.710935] [USB3][create_attr_file]-
[ 2.710942] [USB3][hi3660_usb3phy_init]+
[ 2.736949] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
[ 2.737533] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
[ 2.738499] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
[ 2.738505] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
[ 2.738510] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
[ 2.738515] [USB3][hi3660_usb3phy_init]-
[ 2.738914] [dwc3_otg_init]+
[ 2.738922] DWC3_OCFG: 0x0
[ 2.738927] DWC3_OCTL: 0x40
[ 2.738932] DWC3_OEVT: 0x80000000
[ 2.738937] DWC3_OEVTEN: 0x0
[ 2.738941] DWC3_OSTS: 0x19
[ 2.738945] DWC3_BCFG: 0x0
[ 2.738950] DWC3_BCEVT: 0x0
[ 2.738955] DWC3_BCEVTEN: 0x0
[ 2.738959] [dwc3_otg_init]-
[ 2.738982] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
[ 2.740697] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 2.740705] [USB3][hisi_dwc3_probe]init state: OFF
[ 2.740711] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 2.740716] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 2.740721] [USB3][hisi_usb_otg_event]event: 1
[ 2.740730] [USB3][hisi_dwc3_probe]-
[ 2.740734] [USB3][event_work]+
[ 2.740737] [USB3][handle_event][handle_event] type: 1
[ 2.740740] [dwc3_otg_work]+
[ 2.740740] evt = 4
[ 2.740742] [dwc3_otg_stop_peripheral]+
[ 2.740752] [dwc3_otg_stop_peripheral]-
[ 2.740757] [dwc3_suspend_device] +
[ 2.740787] [dwc3_suspend_device] -
[ 2.740792] [dwc3_otg_work]-
[ 2.740796] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
[ 2.740803] [USB3][handle_event]hisi usb status: DEVICE -> OFF
[ 2.740816] [USB3][event_work]-
[ 2.741061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.741068] ehci-pci: EHCI PCI platform driver
[ 2.741093] ehci-platform: EHCI generic platform driver
[ 2.741170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.741182] ohci-pci: OHCI PCI platform driver
[ 2.741208] ohci-platform: OHCI generic platform driver
[ 2.741441] usbcore: registered new interface driver cdc_acm
[ 2.741446] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.741477] usbcore: registered new interface driver usb-storage
[ 2.741527] usbcore: registered new interface driver usbserial
[ 2.741550] usbcore: registered new interface driver usbserial_generic
[ 2.741570] usbserial: USB Serial support registered for generic
[ 2.741593] usbcore: registered new interface driver ftdi_sio
[ 2.741613] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.741637] usbcore: registered new interface driver option
[ 2.741656] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.741679] usbcore: registered new interface driver pl2303
[ 2.741697] usbserial: USB Serial support registered for pl2303
[ 2.741721] usbcore: registered new interface driver qcserial
[ 2.741740] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.741761] usbcore: registered new interface driver usb_serial_simple
[ 2.741779] usbserial: USB Serial support registered for carelink
[ 2.741795] usbserial: USB Serial support registered for zio
[ 2.741815] usbserial: USB Serial support registered for funsoft
[ 2.741834] usbserial: USB Serial support registered for flashloader
[ 2.741851] usbserial: USB Serial support registered for google
[ 2.741869] usbserial: USB Serial support registered for libtransistor
[ 2.741886] usbserial: USB Serial support registered for vivopay
[ 2.741903] usbserial: USB Serial support registered for moto_modem
[ 2.741920] usbserial: USB Serial support registered for motorola_tetra
[ 2.741938] usbserial: USB Serial support registered for novatel_gps
[ 2.741956] usbserial: USB Serial support registered for hp4x
[ 2.741975] usbserial: USB Serial support registered for suunto
[ 2.741991] usbserial: USB Serial support registered for siemens_mpi
[ 2.742042] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 2.742046] [I/hisi_pd] pd_dpm_init
[ 2.742107] [I/hisi_pd] pd_dpm_probe : +++++++++
[ 2.742143] [I/hisi_pd] pd_dpm_probe ++++
[ 2.742143]
[ 2.742300] rt1711h_init (1.1.8_G): initializing...
[ 2.742315] rt1711h node found...
[ 2.742450] usbcore: registered new interface driver xpad
[ 2.742476] usbcore: registered new interface driver usb_acecad
[ 2.742501] usbcore: registered new interface driver aiptek
[ 2.742523] usbcore: registered new interface driver gtco
[ 2.742547] usbcore: registered new interface driver hanwang
[ 2.742568] usbcore: registered new interface driver kbtab
[ 2.742988] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
[ 2.743122] i2c /dev entries driver
[ 2.743330] IR NEC protocol handler initialized
[ 2.743335] IR RC5(x/sz) protocol handler initialized
[ 2.743340] IR RC6 protocol handler initialized
[ 2.743345] IR JVC protocol handler initialized
[ 2.743350] IR Sony protocol handler initialized
[ 2.743355] IR SANYO protocol handler initialized
[ 2.743359] IR Sharp protocol handler initialized
[ 2.743364] IR MCE Keyboard/mouse protocol handler initialized
[ 2.743368] IR XMP protocol handler initialized
[ 2.744230] sp805-wdt e8a06000.watchdog: registration successful
[ 2.744317] sp805-wdt e8a07000.watchdog: registration successful
[ 2.744388] device-mapper: uevent: version 1.0.3
[ 2.744453] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.744562] Bluetooth: HCI UART driver ver 2.3
[ 2.744571] Bluetooth: HCI UART protocol H4 registered
[ 2.744602] Bluetooth: HCI UART protocol LL registered
[ 2.745508] sched-energy: Sched-energy-costs installed from DT
[ 2.745676] WARN: cpu=4, domain=DIE: incr. energy eff 3915[0]->5078[1]
[ 2.745685] WARN: cpu=0, domain=DIE: incr. energy eff 11349[0]->11636[1]
[ 2.747520] sdhci: Secure Digital Host Controller Interface driver
[ 2.747529] sdhci: Copyright(c) Pierre Ossman
[ 2.747615] Synopsys Designware Multimedia Card Interface Driver
[ 2.748284] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
[ 2.748296] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 2.748936] CPU1: update max cpu_capacity 462
[ 2.750501] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 2.750596] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 2.750610] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 2.750652] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 59,32 bit host data width,256 deep fifo
[ 2.750863] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 2.769457] CPU5: update max cpu_capacity 1024
[ 2.771918] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.796515] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
[ 2.796546] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.798804] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.799016] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
[ 2.799046] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
[ 2.799136] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
[ 2.799650] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.804005] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.804256] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.809878] usbcore: registered new interface driver usbhid
[ 2.809902] usbhid: USB HID core driver
[ 2.810390] ashmem: initialized
[ 2.811448] hisi_ddr_devfreq ddr_devfreq: init success
[ 2.815857] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 2.819219] coresight-etm4x ecc40000.etm: CPU0: ETM v4.0 initialized
[ 2.819986] coresight-etm4x ecd40000.etm: CPU1: ETM v4.0 initialized
[ 2.820737] coresight-etm4x ece40000.etm: CPU2: ETM v4.0 initialized
[ 2.821566] coresight-etm4x ecf40000.etm: CPU3: ETM v4.0 initialized
[ 2.822376] coresight-etm4x ed440000.etm: CPU4: ETM v4.0 initialized
[ 2.823141] coresight-etm4x ed540000.etm: CPU5: ETM v4.0 initialized
[ 2.823914] coresight-etm4x ed640000.etm: CPU6: ETM v4.0 initialized
[ 2.824689] coresight-etm4x ed740000.etm: CPU7: ETM v4.0 initialized
[ 2.825734] optee: probing for conduit method from DT.
[ 2.825761] optee: api uid mismatch
[ 2.826060] usbcore: registered new interface driver snd-usb-audio
[ 2.827809] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
[ 2.828145] netem: version 1.3
[ 2.828158] u32 classifier
[ 2.828167] Actions configured
[ 2.828193] Netfilter messages via NETLINK v0.30.
[ 2.828378] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.828565] ctnetlink v0.93: registering with nfnetlink.
[ 2.828947] xt_time: kernel timezone is -0000
[ 2.829085] gre: GRE over IPv4 demultiplexor driver
[ 2.829096] IPv4 over IPsec tunneling driver
[ 2.829800] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.830458] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.830575] Initializing XFRM netlink socket
[ 2.830625] IPsec XFRM device driver
[ 2.830741] NET: Registered protocol family 10
[ 2.835889] Segment Routing with IPv6
[ 2.835990] mip6: Mobile IPv6
[ 2.836023] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.837386] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.838376] NET: Registered protocol family 17
[ 2.838411] NET: Registered protocol family 15
[ 2.838473] Bridge firewalling registered
[ 2.838593] Bluetooth: RFCOMM TTY layer initialized
[ 2.838620] Bluetooth: RFCOMM socket layer initialized
[ 2.838673] Bluetooth: RFCOMM ver 1.11
[ 2.838693] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.838710] Bluetooth: HIDP socket layer initialized
[ 2.838756] l2tp_core: L2TP core driver, V2.0
[ 2.838776] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.838786] 8021q: 802.1Q VLAN Support v1.8
[ 2.839146] 9pnet: Installing 9P2000 support
[ 2.840242] registered taskstats version 1
[ 2.840256] Loading compiled-in X.509 certificates
[ 2.842178] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[ 2.842669] Btrfs loaded, crc32c=crc32c-generic
[ 2.851322] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
[ 2.851982] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
[ 2.852102] serial serial0: tty port ttyAMA4 registered
[ 2.852296] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
[ 2.853327] uart-pl011 fdf01000.serial: DMA channel TX dma0chan7
[ 2.856698] console [ttyAMA6] enabled
[ 2.890716] uart-pl011 fdf01000.serial: DMA channel RX dma0chan6
[ 2.895664] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
[ 2.930451] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
[ 2.931461] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffffff8009e85000
[ 2.939341] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
[ 2.943357] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
[ 2.948275] ufs flash device must set VS_DebugSaveConfigTime 0x10
[ 2.953243] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
[ 2.959643] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
[ 2.962147] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffffff8009e8d000
[ 2.967279] ufshcd-hi3660 ff3b0000.ufs: TX_EQUALIZER DB value lane1 = 0x1
[ 2.972360] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
[ 2.976977] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 2.983604] rt1711_i2c_probe
[ 2.987189] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 2.991364] I2C functionality : OK...
[ 3.031491] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
[ 3.038684] rt_parse_dt
[ 3.039265] scsi 0:0:0:49488: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.040502] scsi 0:0:0:49456: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.041390] scsi 0:0:0:49476: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.042238] scsi 0:0:0:0: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.043360] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 3.043392] scsi 0:0:0:1: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.043420] sd 0:0:0:0: [sda] Write Protect is off
[ 3.043427] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 3.043570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.046018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.046129] scsi 0:0:0:2: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.046160] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 3.046241] sd 0:0:0:1: [sdb] Write Protect is off
[ 3.046247] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 3.046392] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.047132] scsi 0:0:0:3: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
[ 3.047432] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 3.047496] sd 0:0:0:2: [sdc] Write Protect is off
[ 3.047501] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 3.047613] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.048329] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.048403] sd 0:0:0:3: [sdd] Write Protect is off
[ 3.048407] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 3.048519] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.050286] random: fast init done
[ 3.050312] Alternate GPT is invalid, using primary GPT.
[ 3.050338] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
[ 3.051797] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 3.125439] hci-ti serial0-0: Falling back to user helper
[ 3.126725] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 3.131281] rt1711h_chipID = 0x2171
[ 3.139170] Alternate GPT is invalid, using primary GPT.
[ 3.145503] regmap_device_register: name = rt1711-4e
[ 3.145543] rt_regmap_rt1711-4e: rt register cache data init
[ 3.151971] sdc: sdc1
[ 3.153836] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 3.166156] rt_regmap_rt1711-4e: cache cata init successfully
[ 6.218377] tcpc_device_register register tcpc device (type_c_port0)
[ 6.224769] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
[ 6.232177] PD Timer number = 37
[ 6.235997] tcpci_timer_init : init OK
[ 6.240581] pd_parse_pdata
[ 6.243306] pd_parse_pdata src pdo data =
[ 6.247316] pd_parse_pdata 0: 0x00019064
[ 6.251242] pd_parse_pdata snk pdo data =
[ 6.255255] pd_parse_pdata 0: 0x000190c8
[ 6.259178] pd_parse_pdata 1: 0x0002d0c8
[ 6.263104] pd_parse_pdata id vdos data =
[ 6.267119] pd_parse_pdata 0: 0xd00029cf
[ 6.271039] pd_parse_pdata 1: 0x00000000
[ 6.274959] pd_parse_pdata 2: 0x00010000
[ 6.278882] dpm_caps: local_dr_power
[ 6.282455] dpm_caps: local_dr_data
[ 6.285943] dpm_caps: local_ext_power
[ 6.289603] dpm_caps: local_usb_comm
[ 6.293176] dpm_caps: local_usb_suspend
[ 6.297009] dpm_caps: local_high_cap
[ 6.300576] dpm_caps: local_give_back
[ 6.304235] dpm_caps: local_no_suspend
[ 6.307982] dpm_caps: local_vconn_supply
[ 6.311902] dpm_caps: attemp_discover_cable_dfp
[ 6.316431] dpm_caps: attemp_enter_dp_mode
[ 6.320525] dpm_caps: attemp_discover_cable
[ 6.324706] dpm_caps: attemp_discover_id
[ 6.328625] dpm_caps: pr_reject_as_source
[ 6.332632] dpm_caps: pr_reject_as_sink
[ 6.336465] dpm_caps: pr_check_gp_source
[ 6.340384] dpm_caps: pr_check_gp_sink
[ 6.344130] dpm_caps: dr_reject_as_dfp
[ 6.347877] dpm_caps: dr_reject_as_ufp
[ 6.351623] dpm_caps: snk_prefer_low_voltage
[ 6.355892] dpm_caps: snk_ignore_mismatch_current
[ 6.360594] dpm_caps = 0xc010c10b
[ 6.363906] [I/hisi_pd] PE:pd_core_init
[ 6.369422] rt1711_init_alert name = type_c_port0
[ 6.374128] rt1711_init_alert gpio # = 291
[ 6.378237] GPIO requested...
[ 6.381223] rt1711_init_alert : IRQ number = 105
[ 6.385840] rt1711_init_alert : irq initialized...
[ 6.391346] IRQF_NO_THREAD Test
[ 6.406612] [I/hisi_pd] TPC-I:typec_init: DRP
[ 6.412903] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
[ 6.420138] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
[ 6.425895] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
[ 6.431995] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
[ 6.437831] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
[ 6.443577] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
[ 6.449675] [USB3][hisi_usb_otg_event]event: 2
[ 6.454119] [I/hisi_pd] TPC-I:** Unattached.SNK
[ 6.454146] [USB3][event_work]+
[ 6.458732] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 6.458734] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 6.476792] [USB3][handle_event][handle_event] type: 2
[ 6.476794] tcpc_device_irq_enable : tcpc irq enable OK!
[ 6.476798] rt1711_i2c_probe probe OK!
[ 6.481957] [USB3][set_vbus_power]set port power 1
[ 6.487446] adv7511 1-0039: 1-0039 supply avdd not found, using dummy regulator
[ 6.491067] [dwc3_otg_work]+
[ 6.491067] evt = 2
[ 6.495863] adv7511 1-0039: 1-0039 supply dvdd not found, using dummy regulator
[ 6.503160] [dwc3_resume_device] +
[ 6.508235] adv7511 1-0039: 1-0039 supply pvdd not found, using dummy regulator
[ 6.515910] [dwc3_resume_device] -
[ 6.518953] adv7511 1-0039: 1-0039 supply a2vdd not found, using dummy regulator
[ 6.518972] adv7511 1-0039: 1-0039 supply v3p3 not found, using dummy regulator
[ 6.526283] [dwc3_otg_start_host]+
[ 6.537338] [I/hisi_pd] TPC-I:[CC_Alert] 0/0
[ 6.544805] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.549032] [I/hisi_pd] [TCPC-I]ps_change=1
[ 6.552192] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.553025] [drm] +.
[ 6.553331] [drm] +.
[ 6.553483] [drm] +.
[ 6.553518] [drm] +.
[ 6.553647] [drm] dss irq = 68.
[ 6.553671] [drm] dss_pri_clk:[400000000]->[400000000].
[ 6.553739] [drm] dss_pxl0_clk:[144000000]->[144000000].
[ 6.553768] [drm] -.
[ 6.553771] [drm] +.
[ 6.553982] [drm] host attach, client name=[adv7533], id=0
[ 6.554099] [drm] -.
[ 6.554114] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
[ 6.554117] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.554119] [drm] No driver support for vblank timestamp query.
[ 6.554637] [drm] client change to HDMI
[ 6.554639] [drm] cma_init!!!!!!
[ 6.554641] [drm] -.
[ 6.555014] [drm] Initialized kirin 1.0.0 20170309 for e8600000.dpe on minor 0
[ 6.555018] [drm] Initialized kirin 1.0.0 20170309 on minor 0
[ 6.555019] [drm] -.
[ 6.555020] [drm] -.
[ 6.555347] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
[ 6.555352] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 6.556863] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
[ 6.556972] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
[ 6.556979] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
[ 6.556991] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,128 deep fifo
[ 6.557102] mmc_host mmc1: card is non-removable.
[ 6.557879] [I/hisi_pd] TPC-I:[CC_Change] 0/0
[ 6.562337] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[ 6.569613] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 6.569616] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 6.569619] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 6.569621] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 6.569623] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
[ 6.569627] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
[ 6.571950] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0xff100000
[ 6.574170] [I/GPIO_HUB] gpio_hub_switch_to_hub: already switch to hub
[ 6.576416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.578527] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
[ 6.581671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.586887] [I/hisi_pd] TPC-I:** Unattached.SNK
[ 6.592194] usb usb1: Product: xHCI Host Controller
[ 6.592196] usb usb1: Manufacturer: Linux 4.14.101-g56136f5a7cad xhci-hcd
[ 6.592198] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 6.592346] hub 1-0:1.0: USB hub found
[ 6.595835] [I/hisi_pd] [TCPC-I]ps_change=1
[ 6.596666] hub 1-0:1.0: 1 port detected
[ 6.659082] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.666189] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.693538] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
[ 6.693898] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.698568] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
[ 6.703032] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.712595] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
[ 6.719862] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.727225] asoc-simple-card soc:sound: i2s-hifi <-> e804f800.hisi_i2s mapping ok
[ 6.734652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.742014] asoc-simple-card soc:sound: ASoC: no DMI vendor name!
[ 6.748286] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.760227] otg_wakelock_init: No USB transceiver found
[ 6.760581] usb usb2: Product: xHCI Host Controller
[ 6.761304] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
[ 6.767292] input: keys as /devices/platform/keys/input/input0
[ 6.773864] usb usb2: Manufacturer: Linux 4.14.101-g56136f5a7cad xhci-hcd
[ 6.774890] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 6.777673] mmc1: new SDIO card at address 0001
[ 6.778157] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 6.778160] wl18xx_driver wl18xx.2.auto: Falling back to user helper
[ 6.788040] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
[ 6.792731] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 6.797726] ALSA device list:
[ 6.804428] hub 2-0:1.0: USB hub found
[ 6.809193] #0: hikey-hdmi
[ 6.998994] hub 2-0:1.0: 1 port detected
[ 6.999107] [dwc3_otg_start_host]-
[ 6.999108] [dwc3_otg_work]-
[ 6.999109] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
[ 6.999111] [USB3][handle_event]hisi usb_status: OFF -> HOST
[ 6.999113] [USB3][event_work]-
[ 7.006557] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 7.030300] uart-pl011 fff32000.serial: no DMA platform data
[ 7.036880] Freeing unused kernel memory: 3136K
[ 7.049297] init: init first stage started!
[ 7.054772] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 7.096718] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/soc/ff3b0000.ufs/by-name/system
[ 7.109547] EXT4-fs (sdd10): mounted filesystem without journal. Opts:
[ 7.116265] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/system,target=/system,type=ext4)=0: Success
[ 7.128640] init: Switching root to '/system'
[ 7.135489] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/soc/ff3b0000.ufs/by-name/vendor
[ 7.148677] EXT4-fs (sdd11): mounted filesystem without journal. Opts:
[ 7.155323] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/vendor,target=/vendor,type=ext4)=0: Success
[ 7.168243] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[ 7.169441] usb 1-1: New USB device found, idVendor=0424, idProduct=2734
[ 7.181735] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.184101] random: init: uninitialized urandom read (40 bytes read)
[ 7.188876] usb 1-1: Product: USB2734
[ 7.198901] usb 1-1: Manufacturer: Microchip Tech
[ 7.232553] hub 1-1:1.0: USB hub found
[ 7.236629] hub 1-1:1.0: 5 ports detected
[ 7.239760] random: init: uninitialized urandom read (40 bytes read)
[ 7.255844] init: Loading SELinux policy
[ 7.267608] SELinux: 8192 avtab hash slots, 21916 rules.
[ 7.278721] SELinux: 8192 avtab hash slots, 21916 rules.
[ 7.284043] SELinux: 1 users, 4 roles, 1357 types, 0 bools, 1 sens, 1024 cats
[ 7.291283] SELinux: 97 classes, 21916 rules
[ 7.297007] SELinux: policy capability network_peer_controls=1
[ 7.302928] SELinux: policy capability open_perms=1
[ 7.307892] SELinux: policy capability extended_socket_class=1
[ 7.313814] SELinux: policy capability always_check_network=0
[ 7.319652] SELinux: policy capability cgroup_seclabel=0
[ 7.325064] SELinux: policy capability nnp_nosuid_transition=1
[ 7.330984] SELinux: Completing initialization.
[ 7.335601] SELinux: Setting up existing superblocks.
[ 7.361901] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 7.389246] usb 2-1: New USB device found, idVendor=0424, idProduct=5734
[ 7.396059] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 7.401359] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 7.401359]
[ 7.401425] audit: type=1403 audit(14.115:2): policy loaded auid=4294967295 ses=4294967295
[ 7.403276] usb 2-1: Product: USB5734
[ 7.424891] audit: type=1404 audit(14.127:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.434424] usb 2-1: Manufacturer: Microchip Tech
[ 7.439778] selinux: SELinux: Loaded file_contexts
[ 7.439778]
[ 7.440452] hub 2-1:1.0: USB hub found
[ 7.450488] hub 2-1:1.0: 4 ports detected
[ 7.451481] random: init: uninitialized urandom read (40 bytes read)
[ 7.479578] init: init second stage started!
[ 7.496499] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 7.504569] init: Init cannot set 'ro.boot.hardware' to 'HiKey960': Read-only property was already set
[ 7.515262] selinux: SELinux: Loaded file_contexts
[ 7.515262]
[ 7.521541] init: Running restorecon...
[ 7.532114] selinux: avc: denied { set } for property=qemu.hw.mainkeys pid=1 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 7.532114]
[ 7.550678] init: Do not have permissions to set 'qemu.hw.mainkeys' to '0' in property file '/vendor/build.prop': SELinux permission check failed
[ 7.553376] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 7.563750] selinux: avc: denied { set } for property=wifi.supplicant_scan_interval pid=1 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 7.563750]
[ 7.590144] init: Do not have permissions to set 'wifi.supplicant_scan_interval' to '15' in property file '/vendor/build.prop': SELinux permission check failed
[ 7.605659] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 7.677225] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
[ 7.684119] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.691442] usb 1-1.1: Product: USB Receiver
[ 7.695712] usb 1-1.1: Manufacturer: Logitech
[ 7.714407] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[ 7.759259] ueventd: ueventd started!
[ 7.763995] selinux: SELinux: Loaded file_contexts
[ 7.763995]
[ 7.770515] ueventd: Parsing file /ueventd.rc...
[ 7.776303] ueventd: Parsing file /vendor/ueventd.rc...
[ 7.782099] ueventd: Parsing file /odm/ueventd.rc...
[ 7.785558] apexd: Bootstrap subcommand detected
[ 7.787091] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 7.801696] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
[ 7.804885] ueventd: Parsing file /ueventd.hikey960.rc...
[ 7.817673] input: Logitech USB Receiver as /devices/platform/soc/ff200000.hisi_usb/ff100000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[ 7.819782] ueventd: Unable to read config file '/ueventd.hikey960.rc': open() failed: No such file or directory
[ 7.835109] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
[ 7.940881] usb 1-1.5: new high-speed USB device number 4 using xhci-hcd
[ 7.949808] ueventd: firmware: loading 'ti-connectivity/TIInit_11.8.32.bts' for '/devices/platform/soc/fdf01000.serial/serial0/serial0-0/firmware/ti-connectivity!TIInit_11.8.32.bts'
[ 7.956993] ueventd: firmware: loading 'ti-connectivity/wl1271-nvs.bin' for '/devices/platform/soc/ff3ff000.dwmmc2/mmc_host/mmc1/mmc1:0001/mmc1:0001:2/wl18xx.2.auto/firmware/ti-connectivity!wl1271-nvs.bin'
[ 7.966186] apexd: wait for '/dev/loop-control' took 165ms
[ 7.976031] Bluetooth: hci0: change remote baud rate command in firmware
[ 7.996576] apexd: Pre-allocated 8 loopback devices
[ 8.001611] apexd: Scanning /system/apex for embedded keys
[ 8.009456] apexd: Scanning /system/apex looking for APEX packages.
[ 8.015835] apexd: Found /system/apex/com.android.runtime.debug.apex
[ 8.062065] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2740
[ 8.068966] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.076288] usb 1-1.5: Product: Hub Controller
[ 8.080741] usb 1-1.5: Manufacturer: Microchip Tech
[ 8.098314] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[ 8.105604] apexd: Successfully mounted package /system/apex/com.android.runtime.debug.apex on /apex/com.android.runtime@1
[ 8.118802] apexd: Found /system/apex/com.android.apex.cts.shim.apex
[ 8.125559] apexd: Skipped when bootstrapping
[ 8.129972] apexd: Found /system/apex/com.android.conscrypt.apex
[ 8.204683] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
[ 8.217780] apexd: 9 output lines suppressed due to ratelimiting
[ 8.284039] Registered swp emulation handler
[ 8.355459] logd.auditd: start
[ 8.358630] logd.klogd: 8353805727
[ 8.358817] watchdogd: watchdogd started (interval 10, margin 20)!
[ 8.372072] binder: 2470:2470 ioctl 4018620d 7fc8bf1c90 returned -22
[ 8.379785] EXT4-fs (sdd13): Ignoring removed nomblk_io_submit option
[ 8.496368] EXT4-fs (sdd13): recovery complete
[ 8.501371] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 8.570158] type=1400 audit(15.283:4): avc: denied { read } for comm="e2fsck" name="sdd13" dev="tmpfs" ino=15480 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 8.588233] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 8.588233]
[ 8.594365] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/by-name/userdata
[ 8.594365]
[ 8.605558] e2fsck:
[ 8.605558]
[ 8.609244] e2fsck: You must have r/w access to the filesystem or be root
[ 8.609244]
[ 8.617565] e2fsck: e2fsck terminated by exit(8)
[ 8.617565]
[ 8.625253] type=1400 audit(15.283:5): avc: denied { read write } for comm="e2fsck" name="sdd13" dev="tmpfs" ino=15480 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 8.645571] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
[ 8.740172] type=1400 audit(15.451:6): avc: denied { write } for comm="init" name="sched_features" dev="debugfs" ino=11336 scontext=u:r:vendor_init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 8.758959] type=1400 audit(15.451:7): avc: denied { write } for comm="init" name="sched_cstate_aware" dev="proc" ino=14412 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 8.777653] type=1400 audit(15.451:8): avc: denied { write } for comm="init" name="sched_sync_hint_enable" dev="proc" ino=14413 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 8.888720] apexd: Marking APEXd as starting
[ 8.893869] apexd: Scanning /system/apex for embedded keys
[ 8.899758] apexd: Found bundled key in package /system/apex/com.android.runtime.debug.apex
[ 8.908858] apexd: Found bundled key in package /system/apex/com.android.apex.cts.shim.apex
[ 8.917457] apexd: Found bundled key in package /system/apex/com.android.conscrypt.apex
[ 8.925631] apexd: Found bundled key in package /system/apex/com.android.tzdata.apex
[ 8.933704] apexd: Found bundled key in package /system/apex/com.android.resolv.apex
[ 8.941845] apexd: Found bundled key in package /system/apex/com.android.neuralnetworks.apex
[ 8.950388] apexd: Scanning /product/apex for embedded keys
[ 8.956028] apexd: ... does not exist. Skipping
[ 9.025509] EXT4-fs (loop2): mounted filesystem without journal. Opts: (null)
[ 9.103511] EXT4-fs (loop3): mounted filesystem without journal. Opts: (null)
[ 9.189080] EXT4-fs (loop4): mounted filesystem without journal. Opts: (null)
[ 9.261950] EXT4-fs (loop5): mounted filesystem without journal. Opts: (null)
[ 9.336172] EXT4-fs (loop6): mounted filesystem without journal. Opts: (null)
[ 9.412017] EXT4-fs (loop7): mounted filesystem without journal. Opts: (null)
[ 9.486654] vdc: Waited 0ms for vold
[ 9.717241] type=1400 audit(16.427:9): avc: denied { setattr } for comm="init" name="media" dev="sdd13" ino=670433 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=0
[ 9.736711] type=1400 audit(16.431:10): avc: denied { write } for comm="init" name="misc" dev="sdd13" ino=253457 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=0
[ 9.742634] logd.daemon: reinit
[ 9.891661] wl18xx_driver wl18xx.2.auto: loading /vendor/firmware/ti-connectivity/wl18xx-conf.bin failed with error -13
[ 9.899852] healthd: No battery devices found
[ 9.903119] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 9.909423] healthd: battery none chg=
[ 9.917861] wl18xx_driver wl18xx.2.auto: Falling back to user helper
[ 9.945303] file system registered
console:/ $ [ 10.042828] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65370 > 65000
[ 10.050341] read descriptors
[ 10.069450] read strings
[ 10.079432] dwc3 ff100000.dwc3: failed to enable ep0out
[ 10.177373] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 10.189932] wlcore: loaded
[ 10.213508] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 60450 < 65000
[ 11.331739] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[ 11.385219] [drm] mode->clock(org) = 148500
[ 11.389445] [drm] dss_pxl0_clk = 144000
[ 11.471611] [drm] Expected : lane_clock = 864 M
[ 11.476382] [drm] Config : lane_clock = 864000000
[ 11.481100] [drm] PHY clock_lane and data_lane config :
[ 11.481100] rg_vrefsel_vcm=85
[ 11.481100] clk_pre_delay=0
[ 11.481100] clk_post_delay=41
[ 11.481100] clk_t_hs_prepare=10
[ 11.481100] clk_t_lpx=13
[ 11.481100] clk_t_hs_zero=27
[ 11.481100] clk_t_hs_trial=10
[ 11.481100] data_pre_delay=61
[ 11.481100] data_post_delay=0
[ 11.481100] data_t_hs_prepare=9
[ 11.481100] data_t_lpx=13
[ 11.481100] data_t_hs_zero=12
[ 11.481100] data_t_hs_trial=12
[ 11.481100] data_t_ta_go=4
[ 11.481100] data_t_ta_get=5
[ 11.529951] [drm] clk_lane_lp2hs_time=63
[ 11.529951] clk_lane_hs2lp_time=58
[ 11.529951] data_lane_lp2hs_time=104
[ 11.529951] data_lane_hs2lp_time=19
[ 11.529951] phy_stop_wait_time=53
[ 11.547845] [drm] hsa_time=33, hbp_time=111, hline_time=1650
[ 11.553575] [drm] lane_byte_clk=108000000, pixel_clk=144000000
[ 11.559428] [drm] dsi_mipi_init ok
[ 11.656096] random: crng init done
[ 11.659531] random: 6 urandom warning(s) missed due to ratelimiting
[ 12.842959] healthd: battery none chg=
[ 12.846940] healthd: battery none chg=
[ 12.856120] healthd: battery none chg=
[ 12.961854] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:804)
[ 13.312460] read descriptors
[ 13.315366] read strings
[ 13.317982] read descriptors
[ 13.320893] read strings
[ 13.330245] acc_open
[ 13.332435] acc_release
[ 13.513584] sdcardfs version 2.0
[ 13.517181] sdcardfs: dev_name -> /data/media
[ 13.522013] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 13.532803] sdcardfs: mnt -> ffffffc0cf56baa0
[ 13.537577] sdcardfs: mounted on top of /data/media type ext4
[ 13.544214] Remount options were mask=23,gid=9997 for vfsmnt ffffffc0cf5bc560.
[ 13.551662] sdcardfs : options - debug:1
[ 13.555767] sdcardfs : options - gid:9997
[ 13.559825] sdcardfs : options - mask:23
[ 13.564299] Remount options were mask=7,gid=9997 for vfsmnt ffffffc0cf5e7720.
[ 13.571535] sdcardfs : options - debug:1
[ 13.575489] sdcardfs : options - gid:9997
[ 13.579527] sdcardfs : options - mask:7
[ 13.583825] Remount options were mask=7,gid=9997 for vfsmnt ffffffc0cf5e8560.
[ 13.584508] type=1400 audit(1569109759.655:25): avc: denied { read } for comm="system_server" name="android.hardware.gnss@1.0-impl.so" dev="sdd11" ino=372 scontext=u:r:system_server:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=0
[ 13.591037] sdcardfs : options - debug:1
[ 13.616801] sdcardfs : options - gid:9997
[ 13.620882] sdcardfs : options - mask:7
[ 13.686558] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65780 > 65000
[ 14.620505] binder: 2794:2822 transaction failed 29189/-22, size 280-8 line 3012
[ 14.778842] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
[ 15.057011] init: Service 'bootanim' (pid 2776) exited with status 0 oneshot service took 3.913000 seconds in background
[ 15.083033] init: processing action (sys.boot_completed=1) from (/init.rc:798)
[ 15.098805] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:78)
[ 15.111659] init: starting service 'exec 13 (/system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...
[ 15.126683] init: processing action (sys.boot_completed=1) from (/system/etc/init/flags_health_check.rc:7)
[ 15.143196] init: processing action (sys.boot_completed=1) from (/system/etc/init/logd.rc:33)
[ 15.144913] selinux: SELinux: Skipping restorecon on directory(/data/system_ce/0)
[ 15.144913]
[ 15.152991] init: starting service 'logd-auditctl'...
[ 15.162840] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65575 > 65000
[ 15.168524] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=0) from (/system/etc/init/wifi-events.rc:20)
[ 15.593497] binder: release 3661:3739 transaction 20104 out, still active
[ 15.646290] binder: 2794:2822 transaction failed 29189/-22, size 280-8 line 3012
[ 15.783862] binder: release 3772:3840 transaction 21153 out, still active
[ 15.868101] binder: 2794:2811 transaction failed 29189/0, size 2360-16 line 2944
[ 15.868103] binder: 2794:3061 transaction failed 29189/0, size 2360-16 line 2944
[ 15.868107] binder: send failed reply for transaction 20104, target dead
[ 15.875559] binder: send failed reply for transaction 21153, target dead
[ 15.932529] binder: 3847:3880 transaction failed 29189/-22, size 312-0 line 3012
[ 16.001762] binder: release 3847:3881 transaction 22228 out, still active
[ 16.008726] binder: unexpected work type, 4, not freed
[ 16.010118] binder: 3741:3760 transaction failed 29189/0, size 256-16 line 2944
[ 16.013654] binder_alloc: 3847: binder_alloc_buf, no vma
[ 16.013659] binder: 3741:3771 transaction failed 29189/-3, size 88-0 line 3135
[ 16.014733] binder: undelivered TRANSACTION_COMPLETE
[ 16.021215] binder: send failed reply for transaction 22228, target dead
[ 16.263644] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 61065 < 65000
[ 16.672502] binder: 2794:2822 transaction failed 29189/-22, size 280-8 line 3012
[ 16.873093] binder: 2794:2822 transaction failed 29189/-22, size 280-8 line 3012
[ 18.767128] init: Service 'setup-bcb' (pid 4342) exited with status 1 oneshot service took 1.016000 seconds in background
[ 19.740569] init: Received control message 'start' for 'setup-bcb' from pid: 2794 (system_server)
[ 19.752006] init: starting service 'setup-bcb'...
[ 19.760306] init: Created socket '/dev/socket/uncrypt', mode 600, user 1000, group 1000
[ 20.776163] init: Service 'setup-bcb' (pid 4500) exited with status 1 oneshot service took 1.017000 seconds in background
[ 21.073915] binder: 2794:2822 transaction failed 29189/-22, size 280-8 line 3012
[ 21.756350] init: Received control message 'start' for 'setup-bcb' from pid: 2794 (system_server)
[ 21.765635] init: starting service 'setup-bcb'...
[ 21.772247] init: Created socket '/dev/socket/uncrypt', mode 600, user 1000, group 1000
[