“Xen on Hikey960”的版本间的差异

来自个人维基
跳转至： 导航、 搜索
 
（未显示1个用户的8个中间版本）
第10行： 第10行：
 
see README-flash-uefi.md to install ser2net first.
 
see README-flash-uefi.md to install ser2net first.
 
參考 recovery-flash-uefi-prebuilt.sh 分成三步驟
 
參考 recovery-flash-uefi-prebuilt.sh 分成三步驟
 +
Ref: https://github.com/96boards-hikey/tools-images-hikey960/issues/33
 +
 
(1.a) download prebuild from  
 
(1.a) download prebuild from  
 +
 
https://snapshots.linaro.org/reference-platform/components/uefi-staging/${VERSION}/hikey960/${RELEASE}/
 
https://snapshots.linaro.org/reference-platform/components/uefi-staging/${VERSION}/hikey960/${RELEASE}/
  
第87行： 第90行：
 
steps:
 
steps:
 
  1. board power off, USB->UART convertor connect to host PC (/dev/ttyUSB0)
 
  1. board power off, USB->UART convertor connect to host PC (/dev/ttyUSB0)
 +
(type picocom -b 115200 /dev/ttyUSB0 in host machine)
 
  2. board in recovery mode: jumper: on-on-off
 
  2. board in recovery mode: jumper: on-on-off
 
  3. plug type-C in OTG.  
 
  3. plug type-C in OTG.  
第92行： 第96行：
 
  5. cd ./uefi  
 
  5. cd ./uefi  
 
  6. sudo ./hikey_idt -c config -p /dev/ttyUSB1
 
  6. sudo ./hikey_idt -c config -p /dev/ttyUSB1
−
[[image:Hikey_idt.png]]
 
  
 
(3) change board to fastboot mode
 
(3) change board to fastboot mode
 
燒完直接進入fastoot mode, 不用改jumper
 
燒完直接進入fastoot mode, 不用改jumper
−
[[image:Fastboot_mode.png]]
+
[[image:Hikey_idt.png]]
  
 
  sudo fastboot flash ptable prm_ptable.img
 
  sudo fastboot flash ptable prm_ptable.img
第147行： 第150行：
 
  make defconfig
 
  make defconfig
 
  make -j8
 
  make -j8
−
  cp xen.efi ../../
+
  cp xen.efi ../../ ##xen.efi is a symbolic link
 +
cp xen ../../
 +
 
  
 
4. Extract the wl18xx-fw-4.bin so your WiFi will work
 
4. Extract the wl18xx-fw-4.bin so your WiFi will work
第191行： 第196行：
 
  configfile $prefix/grub.cfg
 
  configfile $prefix/grub.cfg
  
−
   
+
create grub.cfg
 +
<source lang="c">
 +
menuentry 'Xen' {
 +
    xen_hypervisor /boot/xen.efi loglvl=all console=dtuart dtuart=/soc/serial@fff32000 efi=no-rs
 +
    xen_module /boot/Image console=tty0 console=hvc0 root=/dev/sdd10 rw efi=noruntime
 +
    devicetree /boot/Image.dtb
 +
  }
 +
</source>
 +
 
 +
copy grub.cfg to root filesystem
 +
grub.cfg  ./rootfs/boot/grub/.k
 +
 
 
6.3 create grubaa64.efi
 
6.3 create grubaa64.efi
 
  export GRUB_MODULES="boot chain configfile echo efinet eval ext2 fat font gettext gfxterm gzio help linux loadenv lsefi normal part_gpt part_msdos read regexp search search_fs_file search_fs_uuid search_label terminal terminfo test tftp time xen_boot"
 
  export GRUB_MODULES="boot chain configfile echo efinet eval ext2 fat font gettext gfxterm gzio help linux loadenv lsefi normal part_gpt part_msdos read regexp search search_fs_file search_fs_uuid search_label terminal terminfo test tftp time xen_boot"
第202行： 第218行：
 
               --prefix="/boot/grub" \
 
               --prefix="/boot/grub" \
 
               $GRUB_MODULES
 
               $GRUB_MODULES
−
Note:
 
  
 +
6.4 create new boot.img
 +
 +
sudo mount boot-0.0+AUTOINC+<some number>hikey960-<some number>.uefi.img loop -o loop
 +
cp grubaa64.efi loop/EFI/BOOT
 +
 +
sudo umount loop
 +
*the new grubbaa64.efi will be installed in (hd3,gpt7)/efi/boot/grubaa64.efi
  
  
第223行： 第245行：
 
  sudo fastboot flash boot boot-0.0+AUTOINC+06e4def583-fb1158a365-r0-hikey-20191111073000-224.uefi.img
 
  sudo fastboot flash boot boot-0.0+AUTOINC+06e4def583-fb1158a365-r0-hikey-20191111073000-224.uefi.img
 
  sudo fastboot flash system rootfs.sparse.img
 
  sudo fastboot flash system rootfs.sparse.img
 +
 +
connect UART-USB as /dev/ttyUSB0
 +
connect USB type-C
 +
board switch to fastbootmode (Jumper :on-off-on)
 +
Power on the board, it will enter fastboot mode (Shows "Press ESCAPE for boot options .Android Fastboot mode - version 0.7.") Press anykey will enter grub.
 +
[[image:Flash_images.png]]
 +
 +
Enter Xen:
 +
<source lang="c">
 +
 +
Using modules provided by bootloader in FDT
 +
Xen 4.13.0-rc (c/s Tue Sep 24 18:58:39 2019 +0100 git:a458d3b) EFI loader
 +
Xen 4.13.0-rc
 +
(XEN) Xen version 4.13.0-rc (cj@) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4]) debug=y  Thu Nov 14 15:19:59 CST 2019
 +
(XEN) Latest ChangeSet: Tue Sep 24 18:58:39 2019 +0100 git:a458d3b
 +
(XEN) build-id: 23c097de1945e8f39d7ad1b9b15905f38a522ad6
 +
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
 +
(XEN) 64-bit Execution:
 +
(XEN)  Processor Features: 0000000000002222 0000000000000000
 +
(XEN)    Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
 +
(XEN)    Extensions: FloatingPoint AdvancedSIMD
 +
(XEN)  Debug Features: 0000000010305106 0000000000000000
 +
(XEN)  Auxiliary Features: 0000000000000000 0000000000000000
 +
(XEN)  Memory Model Features: 0000000000001122 0000000000000000
 +
(XEN)  ISA Features:  0000000000011120 0000000000000000
 +
(XEN) 32-bit Execution:
 +
(XEN)  Processor Features: 00000131:00011011
 +
(XEN)    Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
 +
(XEN)    Extensions: GenericTimer Security
 +
(XEN)  Debug Features: 03010066
 +
(XEN)  Auxiliary Features: 00000000
 +
(XEN)  Memory Model Features: 10201105 40000000 01260000 02102211
 +
(XEN)  ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
 +
(XEN) Using SMC Calling Convention v1.1
 +
(XEN) Using PSCI v1.1
 +
(XEN) SMP: Allowing 8 CPUs
 +
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 1920 KHz
 +
(XEN) GICv2 initialization:
 +
(XEN)        gic_dist_addr=00000000e82b1000
 +
(XEN)        gic_cpu_addr=00000000e82b2000
 +
(XEN)        gic_hyp_addr=00000000e82b4000
 +
(XEN)        gic_vcpu_addr=00000000e82b6000
 +
(XEN)        gic_maintenance_irq=25
 +
(XEN) GICv2: 384 lines, 8 cpus, secure (IID 0200143b).
 +
(XEN) XSM Framework v1.0.0 initialized
 +
(XEN) Initialising XSM SILO mode
 +
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
 +
(XEN) Initializing Credit2 scheduler
 +
(XEN)  load_precision_shift: 18
 +
(XEN)  load_window_shift: 30
 +
(XEN)  underload_balance_tolerance: 0
 +
(XEN)  overload_balance_tolerance: -3
 +
(XEN)  runqueues arrangement: socket
 +
(XEN)  cap enforcement granularity: 10ms
 +
(XEN) load tracking window length 1073741824 ns
 +
(XEN) Allocated console ring of 64 KiB.
 +
(XEN) CPU0: Guest atomics will try 4 times before pausing the domain
 +
(XEN) Bringing up CPU1
 +
(XEN) CPU1: Guest atomics will try 20 times before pausing the domain
 +
(XEN) CPU 1 booted.
 +
(XEN) Bringing up CPU2
 +
(XEN) CPU2: Guest atomics will try 13 times before pausing the domain
 +
(XEN) CPU 2 booted.
 +
(XEN) Bringing up CPU3
 +
(XEN) CPU3: Guest atomics will try 13 times before pausing the domain
 +
(XEN) CPU 3 booted.
 +
(XEN) Bringing up CPU4
 +
(XEN) CPU4 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
 +
(XEN) disable cpu (see big.LITTLE.txt under docs/).
 +
(XEN) CPU4 never came online
 +
(XEN) Failed to bring up CPU 4 (error -5)
 +
(XEN) Bringing up CPU5
 +
(XEN) CPU5 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
 +
(XEN) disable cpu (see big.LITTLE.txt under docs/).
 +
(XEN) CPU5 never came online
 +
(XEN) Failed to bring up CPU 5 (error -5)
 +
(XEN) Bringing up CPU6
 +
(XEN) CPU6 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
 +
(XEN) disable cpu (see big.LITTLE.txt under docs/).
 +
(XEN) CPU6 never came online
 +
(XEN) Failed to bring up CPU 6 (error -5)
 +
(XEN) Bringing up CPU7
 +
(XEN) CPU7 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
 +
(XEN) disable cpu (see big.LITTLE.txt under docs/).
 +
(XEN) CPU7 never came online
 +
(XEN) Failed to bring up CPU 7 (error -5)
 +
(XEN) Brought up 4 CPUs
 +
(XEN) I/O virtualisation disabled
 +
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
 +
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
 +
(XEN) Adding cpu 0 to runqueue 0
 +
(XEN)  First cpu on runqueue, activating
 +
(XEN) Adding cpu 1 to runqueue 0
 +
(XEN) Adding cpu 2 to runqueue 0
 +
(XEN) Adding cpu 3 to runqueue 0
 +
(XEN) alternatives: Patching with alt table 00000000002d40a8 -> 00000000002d47bc
 +
(XEN) *** LOADING DOMAIN 0 ***
 +
(XEN) Loading d0 kernel from boot module @ 00000000b936c000
 +
(XEN) Allocating 1:1 mappings totalling 512MB for dom0:
 +
(XEN) BANK[0] 0x000000c0000000-0x000000e0000000 (512MB)
 +
(XEN) Grant table range: 0x000000b921c000-0x000000b925c000
 +
(XEN) Allocating PPI 16 for event channel interrupt
 +
(XEN) Loading zImage from 00000000b936c000 to 00000000c0080000-00000000c1187200
 +
(XEN) Loading d0 DTB to 0x00000000c8000000-0x00000000c800a663
 +
(XEN) Initial low memory virq threshold set at 0x4000 pages.
 +
(XEN) Scrubbing Free RAM in background
 +
(XEN) Std. Loglevel: All
 +
(XEN) Guest Loglevel: All
 +
(XEN) ***************************************************
 +
(XEN) PLEASE SPECIFY dom0_mem PARAMETER - USING 512M FOR NOW
 +
(XEN) ***************************************************
 +
(XEN) 3... 2... 1...
 +
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
 +
(XEN) Freed 356kB init memory.
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER32
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER36
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER40
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER44
 +
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
 +
[    0.000000] Booting Linux on physical CPU 0x0
 +
[    0.000000] Linux version 4.14.0-rc7-linaro-hikey960+ (cj@cj-VirtualBox) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP PREEMPT Tue Nov 12 10:37:03 CST 2019
 +
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
 +
[    0.000000] Machine model: HiKey960
 +
[    0.000000] Xen 4.13 support found
 +
[    0.000000] efi: Getting EFI parameters from FDT:
 +
[    0.000000] efi: UEFI not found.
 +
[    0.000000] cma: Reserved 16 MiB at 0x00000000df000000
 +
[    0.000000] NUMA: No NUMA configuration found
 +
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000dfffffff]
 +
[    0.000000] NUMA: NODE_DATA [mem 0xdefb3d80-0xdefb587f]
 +
[    0.000000] Zone ranges:
 +
[    0.000000]  DMA      [mem 0x0000000032000000-0x00000000dfffffff]
 +
[    0.000000]  Normal  empty
 +
[    0.000000] Movable zone start for each node
 +
[    0.000000] Early memory node ranges
 +
[    0.000000]  node  0: [mem 0x0000000032000000-0x00000000320fffff]
 +
[    0.000000]  node  0: [mem 0x00000000c0000000-0x00000000dfffffff]
 +
[    0.000000] Initmem setup node 0 [mem 0x0000000032000000-0x00000000dfffffff]
 +
[    0.000000] psci: probing for conduit method from DT.
 +
[    0.000000] psci: PSCIv1.1 detected in firmware.
 +
[    0.000000] psci: Using standard PSCI v0.2 function IDs
 +
[    0.000000] psci: Trusted OS migration not required
 +
[    0.000000] percpu: Embedded 23 pages/cpu @ffff8000def54000 s55448 r8192 d30568 u94208
 +
[    0.000000] Detected VIPT I-cache on CPU0
 +
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
 +
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129276
 +
[    0.000000] Policy zone: DMA
 +
[    0.000000] Kernel command line: console=tty0 console=hvc0 root=/dev/sdd10 rw efi=noruntime
 +
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
 +
[    0.000000] Memory: 456524K/525312K available (10364K kernel code, 1180K rwdata, 4664K rodata, 1152K init, 405K bss, 52404K reserved, 16384K cma-reserved)
 +
[    0.000000] Virtual kernel memory layout:
 +
[    0.000000]    modules : 0xffff000000000000 - 0xffff000008000000  (  128 MB)
 +
[    0.000000]    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000  (129022 GB)
 +
[    0.000000]      .text : 0xffff000008080000 - 0xffff000008aa0000  ( 10368 KB)
 +
[    0.000000]    .rodata : 0xffff000008aa0000 - 0xffff000008f40000  (  4736 KB)
 +
[    0.000000]      .init : 0xffff000008f40000 - 0xffff000009060000  (  1152 KB)
 +
[    0.000000]      .data : 0xffff000009060000 - 0xffff000009187200  (  1181 KB)
 +
[    0.000000]        .bss : 0xffff000009187200 - 0xffff0000091ec9e0  (  406 KB)
 +
[    0.000000]    fixed  : 0xffff7dfffe7fd000 - 0xffff7dfffec00000  (  4108 KB)
 +
[    0.000000]    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000  (    16 MB)
 +
[    0.000000]    vmemmap : 0xffff7e0000000000 - 0xffff800000000000  (  2048 GB maximum)
 +
[    0.000000]              0xffff7e0000c80000 - 0xffff7e0003800000  (    43 MB actual)
 +
[    0.000000]    memory  : 0xffff800032000000 - 0xffff8000e0000000  (  2784 MB)
 +
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 +
[    0.000000] Preemptible hierarchical RCU implementation.
 +
[    0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
 +
[    0.000000] Tasks RCU enabled.
 +
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 +
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
 +
[    0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (virt).
 +
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
 +
[    0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
 +
[    0.000128] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
 +
[    0.000601] Console: colour dummy device 80x25
 +
[    0.000897] console [tty0] enabled
 +
[    0.355616] console [hvc0] enabled
 +
[    0.359173] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
 +
[    0.369246] pid_max: default: 32768 minimum: 301
 +
[    0.373983] Security Framework initialized
 +
[    0.378269] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
 +
[    0.385212] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
 +
[    0.392081] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
[    0.398751] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +
[    0.421998] ASID allocator initialised with 65536 entries
 +
[    0.428097] xen:grant_table: Grant tables using version 1 layout
 +
[    0.434050] Grant table initialized
 +
[    0.437597] xen:events: Using FIFO-based ABI
 +
[    0.441992] Xen: initializing cpu0
 +
[    0.449941] Hierarchical SRCU implementation.
 +
[    0.463279] EFI services will not be available.
 +
[    0.475771] smp: Bringing up secondary CPUs ...
 +
(XEN) d0v1: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
 +
(XEN) d0v2: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
 +
(XEN) d0v3: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
 +
[    0.508465] Detected VIPT I-cache on CPU1
 +
[    0.514692] Xen: initializing cpu1
 +
[    0.514723] CPU1: Booted secondary processor [410fd034]
 +
[    0.540531] Detected VIPT I-cache on CPU2
 +
[    0.546673] Xen: initializing cpu2
 +
[    0.546692] CPU2: Booted secondary processor [410fd034]
 +
[    0.572658] Detected VIPT I-cache on CPU3
 +
[    0.578783] Xen: initializing cpu3
 +
[    0.578798] CPU3: Booted secondary processor [410fd034]
 +
[    0.578887] smp: Brought up 1 node, 4 CPUs
 +
[    0.621426] SMP: Total of 4 processors activated.
 +
[    0.626192] CPU features: detected feature: 32-bit EL0 Support
 +
[    0.632756] CPU: All CPU(s) started at EL1
 +
[    0.636795] alternatives: patching kernel code
 +
[    0.642229] devtmpfs: initialized
 +
[    0.650582] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
 +
[    0.659911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 +
[    0.660098] random: fast init done
 +
[    0.673061] futex hash table entries: 1024 (order: 5, 131072 bytes)
 +
[    0.680046] pinctrl core: initialized pinctrl subsystem
 +
[    0.687255] DMI not present or invalid.
 +
[    0.691546] NET: Registered protocol family 16
 +
[    0.699715] vdso: 2 pages (1 code @ ffff000008aa6000, 1 data @ ffff000009065000)
 +
[    0.707101] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 +
[    0.714961] DMA: preallocated 256 KiB pool for atomic allocations
 +
[    0.721147] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB
 +
[    0.729578] software IO TLB [mem 0xdbc00000-0xdc000000] (4MB) mapped at [ffff8000dbc00000-ffff8000dbffffff]
 +
[    0.739852] Serial: AMBA PL011 UART driver
 +
[    0.764882] hi3660-mbox e896b000.mailbox: Mailbox enabled
 +
[    0.771456] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
 +
[    0.782890] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
 +
[    0.801816] Synchronous External Abort: synchronous external abort (0x96000210) at 0xffff00000944dfe0
 +
[    0.811029] Internal error: : 96000210 [#1] PREEMPT SMP
 +
[    0.816251] Modules linked in:
 +
[    0.819383] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc7-linaro-hikey960+ #1
 +
[    0.827174] Hardware name: HiKey960 (DT)
 +
[    0.831162] task: ffff8000dc910000 task.stack: ffff000008068000
 +
[    0.837164] PC is at amba_device_try_add+0xe8/0x268
 +
[    0.842089] LR is at amba_device_try_add+0xcc/0x268
 +
[    0.847031] pc : [<ffff0000084f5320>] lr : [<ffff0000084f5304>] pstate: 40000045
 +
[    0.854489] sp : ffff00000806bbe0
 +
[    0.857868] x29: ffff00000806bbe0 x28: ffff000009040588
 +
[    0.863246] x27: 0000000000000004 x26: 0000000000000000
 +
[    0.868622] x25: ffff8000defe5088 x24: 0000000000000000
 +
[    0.873999] x23: ffff00000944d000 x22: 0000000000001000
 +
[    0.879380] x21: ffff8000dc21a6f8 x20: 0000000000000000
 +
[    0.884752] x19: ffff8000dc21a400 x18: 0000000000000020
 +
[    0.890133] x17: 0000000000000001 x16: 00000000deadbeef
 +
[    0.895505] x15: ffffffffffffffff x14: ffffffffffffffff
 +
[    0.900882] x13: 0000000000000020 x12: 0101010101010101
 +
[    0.906258] x11: 0000000000000028 x10: 0101010101010101
 +
[    0.911635] x9 : 0000000000000000 x8 : ffff8000dc203d80
 +
[    0.917011] x7 : 0000000000000000 x6 : 000000000000003f
 +
[    0.922388] x5 : 0000000000000000 x4 : ffff0000091d4190
 +
[    0.927765] x3 : 0000000000000000 x2 : ffff00000944dfe0
 +
[    0.933141] x1 : 0000000000000000 x0 : 0000000000000000
 +
[    0.938519] Process swapper/0 (pid: 1, stack limit = 0xffff000008068000)
 +
[    0.945285] Call trace:
 +
[    0.947798] Exception stack(0xffff00000806baa0 to 0xffff00000806bbe0)
 +
[    0.954304] baa0: 0000000000000000 0000000000000000 ffff00000944dfe0 0000000000000000
 +
[    0.962196] bac0: ffff0000091d4190 0000000000000000 000000000000003f 0000000000000000
 +
[    0.970091] bae0: ffff8000dc203d80 0000000000000000 0101010101010101 0000000000000028
 +
[    0.977979] bb00: 0101010101010101 0000000000000020 ffffffffffffffff ffffffffffffffff
 +
[    0.985869] bb20: 00000000deadbeef 0000000000000001 0000000000000020 ffff8000dc21a400
 +
[    0.993761] bb40: 0000000000000000 ffff8000dc21a6f8 0000000000001000 ffff00000944d000
 +
[    1.001653] bb60: 0000000000000000 ffff8000defe5088 0000000000000000 0000000000000004
 +
[    1.009548] bb80: ffff000009040588 ffff00000806bbe0 ffff0000084f5304 ffff00000806bbe0
 +
[    1.017435] bba0: ffff0000084f5320 0000000040000045 ffff00000806bbe0 ffff0000084f5304
 +
[    1.025327] bbc0: ffffffffffffffff 00000000fffffffe ffff00000806bbe0 ffff0000084f5320
 +
[    1.033221] [<ffff0000084f5320>] amba_device_try_add+0xe8/0x268
 +
[    1.039201] [<ffff0000084f5588>] amba_device_add+0x18/0xe0
 +
[    1.044762] [<ffff000008922fc8>] of_platform_bus_create+0x2b8/0x320
 +
[    1.051082] [<ffff000008922e74>] of_platform_bus_create+0x164/0x320
 +
[    1.057413] [<ffff0000089231a0>] of_platform_populate+0x70/0xd0
 +
[    1.063404] [<ffff000008f8e218>] of_platform_default_populate_init+0x64/0x78
 +
[    1.070513] [<ffff000008083980>] do_one_initcall+0x38/0x120
 +
[    1.076150] [<ffff000008f40d0c>] kernel_init_freeable+0x188/0x22c
 +
[    1.082305] [<ffff000008a82268>] kernel_init+0x10/0x100
 +
[    1.087590] [<ffff000008084b58>] ret_from_fork+0x10/0x18
 +
[    1.092969] Code: f9001fb8 8b0202e2 52800001 52800018 (b9400040)
 +
[    1.099148] ---[ end trace 0af73e04a0d75c0a ]---
 +
[    1.103845] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 +
[    1.103845]
 +
[    1.113090] SMP: stopping secondary CPUs
 +
[    1.117094] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 +
[    1.117094]
 +
</source>

2019年11月21日 (四) 10:49的最后版本

Reference: https://wiki.xenproject.org/wiki/HiKey960

1. Building UEFI 

export BUILD_PATH=~/build
cd ${BUILD_PATH}

download tools-images-hikey960 

git clone https://github.com/96boards-hikey/tools-images-hikey960
cd tools-images-hikey960

see README-flash-uefi.md to install ser2net first.
參考 recovery-flash-uefi-prebuilt.sh 分成三步驟
Ref: https://github.com/96boards-hikey/tools-images-hikey960/issues/33

(1.a) download prebuild from

https://snapshots.linaro.org/reference-platform/components/uefi-staging/${VERSION}/hikey960/${RELEASE}/

BASE_URL=https://snapshots.linaro.org/reference-platform/components/uefi-staging
VERSION=latest
PRODUCT=hikey960
RELEASE=release
DEVICE=/dev/ttyUSB1
UEFI_URL=${BASE_URL}/${VERSION}/${PRODUCT}/${RELEASE}/ 

mkdir -p ./uefi
cd uefi
wget -A bin,config,efi,hikey_idt,img,txt -m -nd -np "$UEFI_URL"

It will download these files: 

config     hisi-sec_uce_boot.img     l-loader.bin    recovery.bin
fip.bin    hisi-sec_usb_xloader.img  MD5SUMS.txt     sec_ptable.img
hikey_idt  hisi-sec_xloader.img      prm_ptable.img

==>>check this http://www.smartfire.cn/thread-707-1-1.html 2019/11/12
(1.b) build from source:

  • fetch repositories: 
#git clone https://github.com/ARM-software/arm-trusted-firmware -b integration
git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
git clone https://github.com/96boards-hikey/atf-fastboot
  • Create the symbol link to OpenPlatformPkg in edk2. 
$cd ${BUILD_PATH}/edk2
$ln -sf ../OpenPlatformPkg
  • prepare AARCH64 toolchain
  • build (debug mode) 
export LOADER_DIR=${BUILD_PATH}/l-loader
cd ${LOADER_DIR}
# Build UEFI & ARM Trust Firmware
## bash ./l-loader.sh hikey960

l-loader.sh not found, modify build_uefi.sh 

##OPTEE=1 #no OPTEE
AARCH64_GCC=LINARO_GCC_7_4  
"LINARO_GCC_7_4") ## line#45
    AARCH64_GCC_7_4=/opt/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu/bin/
    PATH=${AARCH64_GCC_7_4}:${PATH} && export PATH

GenFvInternalLib.c:24:23: fatal error: uuid/uuid.h: 沒有此一檔案或目錄 

(1) vi vi ./edk2/BaseTools/Source/C/GenFv/GenFvInternalLib.c
#include <linux/uuid.h> //uuid/uuid.h
(2) sudo ln -sf /lib/x86_64-linux-gnu/libuuid.so.1 /lib/libuuid.so

Output imagres including partition table are generated in l-loader directory. 

recovery.bin = bl1.bin + BL33_AP_UEFI.fd (by gen_loader_hikey960.py)
l-loader.bin = bl2.bin
fip.bin

(2)flash recovery files
(2.1)prepare config and files (if build from source) 

vi config
# The content of config file
./hisi-sec_usb_xloader.img 0x00020000
./hisi-sec_uce_boot.img 0x6A908000
./recovery.bin 0x1AC00000

Used files: 

#recovery mode:
hike_idt from 1.a download
config can be copied from 1.a download
hisi-sec_usb_xloader.img from 1.a download
hisi-sec_uce_boot.img from 1.a download
recovery.bin from 1.b
#fastboot mode
prm_ptable.img from 1.a download
hisi-sec_xloader.img from 1.a download
l-loader.bin  from 1.b
fip.bin from 1.b

(2.2) change board to recovery mode
steps: 

1. board power off, USB->UART convertor connect to host PC (/dev/ttyUSB0)

(type picocom -b 115200 /dev/ttyUSB0 in host machine) 

2. board in recovery mode: jumper: on-on-off
3. plug type-C in OTG. 
4. board power on. In host PC, you will see /dev/ttyUSB1 node. 只有在recover mode才會有USB 變COM.
5. cd ./uefi 
6. sudo ./hikey_idt -c config -p /dev/ttyUSB1

(3) change board to fastboot mode
燒完直接進入fastoot mode, 不用改jumper
Hikey idt.png 

sudo fastboot flash ptable prm_ptable.img
sudo fastboot flash xloader hisi-sec_xloader.img (無法寫入)
sudo fastboot flash fastboot l-loader.bin
sudo fastboot flash fip fip.bin

Switch to normal mode, power on
Uefi boot.png

xxx2. Download boot and system image
boot - The FAT32 64MB partition containing GRUB (or xen.efi if desired)
system - The rootfs (Ext4) containing the OS and /boot directory for GRUB to search.

try this:(NO HIKEY960)
https://snapshots.linaro.org/reference-platform/embedded/morty/hikey/latest/rpb/


download rootfs from 

rpb-console-image-hikey960-<some number>.rootfs.img.gz (not used)

download uefi boot
boot-0.0+AUTOINC+<some number>hikey960-<some number>.uefi.img

find these:
boot-0.0+AUTOINC+06e4def583-fb1158a365-r0-hikey-20191111073000-224.uefi.img
rpb-console-image-hikey-20191111073000-224.rootfs.img.gz


2. Building Linux 

export TOOLS=/opt/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu/bin
export PATH=$PATH:$TOOLS
git clone https://github.com/96boards-hikey/linux.git
cd linux
git checkout origin/hikey960-upstream-rebase
export CROSS_COMPILE=aarch64-linux-gnu-
export ARCH=arm64
make defconfig

check .config, CONFIG_XEN_DOM0=y CONFIG_XEN=y 

make -j8
cp -f arch/$ARCH/boot/Image ../Image
cp -f arch/$ARCH/boot/dts/hisilicon/hi3660-hikey960.dtb ../Image.dtb

3. Building Xen 

git clone git://xenbits.xen.org/xen.git
cd xen/xen

export CROSS_COMPILE=aarch64-linux-gnu-
export ARCH=arm64
export XEN_TARGET_ARCH=arm64
make defconfig
make -j8
cp xen.efi ../../ ##xen.efi is a symbolic link
cp xen ../../


4. Extract the wl18xx-fw-4.bin so your WiFi will work 

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
cd linux-firmware
cp ti-connectivity/wl18xx-fw-4.bin ../

5.下載 rootfs
check https://releases.linaro.org/debian/images/developer-arm64/latest/ 

wget https://releases.linaro.org/debian/images/developer-arm64/latest/linaro-stretch-developer- 20170720-71.tar.gz
sudo tar -xzf linaro-stretch-developer-20180416-89.tar.gz
sudo mv binary rootfs
sudo cp Image rootfs/boot
sudo cp Image.dtb rootfs/boot
sudo cp xen.efi rootfs/boot
sudo mkdir -p rootfs/lib/firmware/ti-connectivity
sudo cp wl18xx-fw-4.bin rootfs/lib/firmware/ti-connectivity

6. Building GRUB
Pre-requirement: 

sudo apt-get install autoconf automake libtool autopoint

6.1 Make 

git clone  https://git.savannah.gnu.org/git/grub.git
cd grub
./bootstrap => autoconf->autogen.sh=>configure
export CROSS_COMPILE=aarch64-linux-gnu-
export ARCH=arm64
./configure --prefix=/usr --target=aarch64-linux-gnu --with-platform=efi
## --target=target-type the type of system for which any compiler tools in the package produce code
## --host=host-type     the type of system on which the package runs.包grub image 的機器. X86
## --prefix
## --with-platform 
make
mkdir ../grub-install
make DESTDIR=`pwd`/../grub-install install
cd ../

6.2 create grub.config
copied from rootfs/usr/share/96boards-tools/grub/grub.configfile 

search.fs_label rootfs root
set prefix=($root)/boot/grub
configfile $prefix/grub.cfg

create grub.cfg 

menuentry 'Xen' {
     xen_hypervisor /boot/xen.efi loglvl=all console=dtuart dtuart=/soc/serial@fff32000 efi=no-rs
     xen_module /boot/Image console=tty0 console=hvc0 root=/dev/sdd10 rw efi=noruntime
     devicetree /boot/Image.dtb
 }

copy grub.cfg to root filesystem 

grub.cfg  ./rootfs/boot/grub/.k

6.3 create grubaa64.efi 

export GRUB_MODULES="boot chain configfile echo efinet eval ext2 fat font gettext gfxterm gzio help linux loadenv lsefi normal part_gpt part_msdos read regexp search search_fs_file search_fs_uuid search_label terminal terminfo test tftp time xen_boot"
grub-install/usr/bin/grub-mkimage 
              --config grub.config \
              --dtb Image.dtb \
              --directory=`pwd`/grub-install/usr/lib/grub/arm64-efi \ ##correct: change lib64 to lib
              --output=grubaa64.efi \
              --format=arm64-efi \
              --prefix="/boot/grub" \
              $GRUB_MODULES

6.4 create new boot.img 

sudo mount boot-0.0+AUTOINC+<some number>hikey960-<some number>.uefi.img loop -o loop
cp grubaa64.efi loop/EFI/BOOT

sudo umount loop
  • the new grubbaa64.efi will be installed in (hd3,gpt7)/efi/boot/grubaa64.efi


7 create file system image 

mkdir loop
dd if=/dev/zero of=rootfs.img bs=1M count=2096
mkfs.ext4 -F -L rootfs rootfs.img #kernel use the label rootfs to mount the rootfs as /
sudo mount -o loop rootfs.img loop
cd rootfs
sudo tar -cf - * | (cd ../loop;sudo tar -xf - )
cd .. ##change dir to build/
sudo umount loop
img2simg rootfs.img rootfs.sparse.img 4096

Note: need install img2simg 

sudo apt install android-tools-fsutils

8. Flash boot.img and system.img 

sudo fastboot flash boot boot-0.0+AUTOINC+06e4def583-fb1158a365-r0-hikey-20191111073000-224.uefi.img
sudo fastboot flash system rootfs.sparse.img

connect UART-USB as /dev/ttyUSB0
connect USB type-C
board switch to fastbootmode (Jumper :on-off-on)
Power on the board, it will enter fastboot mode (Shows "Press ESCAPE for boot options .Android Fastboot mode - version 0.7.") Press anykey will enter grub.
Flash images.png

Enter Xen: 

Using modules provided by bootloader in FDT
Xen 4.13.0-rc (c/s Tue Sep 24 18:58:39 2019 +0100 git:a458d3b) EFI loader
 Xen 4.13.0-rc
(XEN) Xen version 4.13.0-rc (cj@) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4]) debug=y  Thu Nov 14 15:19:59 CST 2019
(XEN) Latest ChangeSet: Tue Sep 24 18:58:39 2019 +0100 git:a458d3b
(XEN) build-id: 23c097de1945e8f39d7ad1b9b15905f38a522ad6
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
(XEN) 64-bit Execution:
(XEN)   Processor Features: 0000000000002222 0000000000000000
(XEN)     Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN)     Extensions: FloatingPoint AdvancedSIMD
(XEN)   Debug Features: 0000000010305106 0000000000000000
(XEN)   Auxiliary Features: 0000000000000000 0000000000000000
(XEN)   Memory Model Features: 0000000000001122 0000000000000000
(XEN)   ISA Features:  0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN)   Processor Features: 00000131:00011011
(XEN)     Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN)     Extensions: GenericTimer Security
(XEN)   Debug Features: 03010066
(XEN)   Auxiliary Features: 00000000
(XEN)   Memory Model Features: 10201105 40000000 01260000 02102211
(XEN)  ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using SMC Calling Convention v1.1
(XEN) Using PSCI v1.1
(XEN) SMP: Allowing 8 CPUs
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 1920 KHz
(XEN) GICv2 initialization:
(XEN)         gic_dist_addr=00000000e82b1000
(XEN)         gic_cpu_addr=00000000e82b2000
(XEN)         gic_hyp_addr=00000000e82b4000
(XEN)         gic_vcpu_addr=00000000e82b6000
(XEN)         gic_maintenance_irq=25
(XEN) GICv2: 384 lines, 8 cpus, secure (IID 0200143b).
(XEN) XSM Framework v1.0.0 initialized
(XEN) Initialising XSM SILO mode
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN)  load_precision_shift: 18
(XEN)  load_window_shift: 30
(XEN)  underload_balance_tolerance: 0
(XEN)  overload_balance_tolerance: -3
(XEN)  runqueues arrangement: socket
(XEN)  cap enforcement granularity: 10ms
(XEN) load tracking window length 1073741824 ns
(XEN) Allocated console ring of 64 KiB.
(XEN) CPU0: Guest atomics will try 4 times before pausing the domain
(XEN) Bringing up CPU1
(XEN) CPU1: Guest atomics will try 20 times before pausing the domain
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
(XEN) CPU2: Guest atomics will try 13 times before pausing the domain
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
(XEN) CPU3: Guest atomics will try 13 times before pausing the domain
(XEN) CPU 3 booted.
(XEN) Bringing up CPU4
(XEN) CPU4 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
(XEN) disable cpu (see big.LITTLE.txt under docs/).
(XEN) CPU4 never came online
(XEN) Failed to bring up CPU 4 (error -5)
(XEN) Bringing up CPU5
(XEN) CPU5 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
(XEN) disable cpu (see big.LITTLE.txt under docs/).
(XEN) CPU5 never came online
(XEN) Failed to bring up CPU 5 (error -5)
(XEN) Bringing up CPU6
(XEN) CPU6 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
(XEN) disable cpu (see big.LITTLE.txt under docs/).
(XEN) CPU6 never came online
(XEN) Failed to bring up CPU 6 (error -5)
(XEN) Bringing up CPU7
(XEN) CPU7 MIDR (0x410fd091) does not match boot CPU MIDR (0x410fd034),
(XEN) disable cpu (see big.LITTLE.txt under docs/).
(XEN) CPU7 never came online
(XEN) Failed to bring up CPU 7 (error -5)
(XEN) Brought up 4 CPUs
(XEN) I/O virtualisation disabled
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
(XEN) Adding cpu 0 to runqueue 0
(XEN)  First cpu on runqueue, activating
(XEN) Adding cpu 1 to runqueue 0
(XEN) Adding cpu 2 to runqueue 0
(XEN) Adding cpu 3 to runqueue 0
(XEN) alternatives: Patching with alt table 00000000002d40a8 -> 00000000002d47bc
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading d0 kernel from boot module @ 00000000b936c000
(XEN) Allocating 1:1 mappings totalling 512MB for dom0:
(XEN) BANK[0] 0x000000c0000000-0x000000e0000000 (512MB)
(XEN) Grant table range: 0x000000b921c000-0x000000b925c000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading zImage from 00000000b936c000 to 00000000c0080000-00000000c1187200
(XEN) Loading d0 DTB to 0x00000000c8000000-0x00000000c800a663
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM in background
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) ***************************************************
(XEN) PLEASE SPECIFY dom0_mem PARAMETER - USING 512M FOR NOW
(XEN) ***************************************************
(XEN) 3... 2... 1... 
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) Freed 356kB init memory.
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER32
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER36
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER40
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER44
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.0-rc7-linaro-hikey960+ (cj@cj-VirtualBox) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP PREEMPT Tue Nov 12 10:37:03 CST 2019
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: HiKey960
[    0.000000] Xen 4.13 support found
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000df000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000dfffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xdefb3d80-0xdefb587f]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000032000000-0x00000000dfffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000032000000-0x00000000320fffff]
[    0.000000]   node   0: [mem 0x00000000c0000000-0x00000000dfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000032000000-0x00000000dfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 23 pages/cpu @ffff8000def54000 s55448 r8192 d30568 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129276
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=tty0 console=hvc0 root=/dev/sdd10 rw efi=noruntime
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 456524K/525312K available (10364K kernel code, 1180K rwdata, 4664K rodata, 1152K init, 405K bss, 52404K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008aa0000   ( 10368 KB)
[    0.000000]     .rodata : 0xffff000008aa0000 - 0xffff000008f40000   (  4736 KB)
[    0.000000]       .init : 0xffff000008f40000 - 0xffff000009060000   (  1152 KB)
[    0.000000]       .data : 0xffff000009060000 - 0xffff000009187200   (  1181 KB)
[    0.000000]        .bss : 0xffff000009187200 - 0xffff0000091ec9e0   (   406 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000c80000 - 0xffff7e0003800000   (    43 MB actual)
[    0.000000]     memory  : 0xffff800032000000 - 0xffff8000e0000000   (  2784 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[    0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[    0.000128] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
[    0.000601] Console: colour dummy device 80x25
[    0.000897] console [tty0] enabled
[    0.355616] console [hvc0] enabled
[    0.359173] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[    0.369246] pid_max: default: 32768 minimum: 301
[    0.373983] Security Framework initialized
[    0.378269] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.385212] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.392081] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.398751] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.421998] ASID allocator initialised with 65536 entries
[    0.428097] xen:grant_table: Grant tables using version 1 layout
[    0.434050] Grant table initialized
[    0.437597] xen:events: Using FIFO-based ABI
[    0.441992] Xen: initializing cpu0
[    0.449941] Hierarchical SRCU implementation.
[    0.463279] EFI services will not be available.
[    0.475771] smp: Bringing up secondary CPUs ...
(XEN) d0v1: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v2: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v3: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0
[    0.508465] Detected VIPT I-cache on CPU1
[    0.514692] Xen: initializing cpu1
[    0.514723] CPU1: Booted secondary processor [410fd034]
[    0.540531] Detected VIPT I-cache on CPU2
[    0.546673] Xen: initializing cpu2
[    0.546692] CPU2: Booted secondary processor [410fd034]
[    0.572658] Detected VIPT I-cache on CPU3
[    0.578783] Xen: initializing cpu3
[    0.578798] CPU3: Booted secondary processor [410fd034]
[    0.578887] smp: Brought up 1 node, 4 CPUs
[    0.621426] SMP: Total of 4 processors activated.
[    0.626192] CPU features: detected feature: 32-bit EL0 Support
[    0.632756] CPU: All CPU(s) started at EL1
[    0.636795] alternatives: patching kernel code
[    0.642229] devtmpfs: initialized
[    0.650582] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
[    0.659911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.660098] random: fast init done
[    0.673061] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.680046] pinctrl core: initialized pinctrl subsystem
[    0.687255] DMI not present or invalid.
[    0.691546] NET: Registered protocol family 16
[    0.699715] vdso: 2 pages (1 code @ ffff000008aa6000, 1 data @ ffff000009065000)
[    0.707101] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.714961] DMA: preallocated 256 KiB pool for atomic allocations
[    0.721147] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB
[    0.729578] software IO TLB [mem 0xdbc00000-0xdc000000] (4MB) mapped at [ffff8000dbc00000-ffff8000dbffffff]
[    0.739852] Serial: AMBA PL011 UART driver
[    0.764882] hi3660-mbox e896b000.mailbox: Mailbox enabled
[    0.771456] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
[    0.782890] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
[    0.801816] Synchronous External Abort: synchronous external abort (0x96000210) at 0xffff00000944dfe0
[    0.811029] Internal error: : 96000210 [#1] PREEMPT SMP
[    0.816251] Modules linked in:
[    0.819383] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc7-linaro-hikey960+ #1
[    0.827174] Hardware name: HiKey960 (DT)
[    0.831162] task: ffff8000dc910000 task.stack: ffff000008068000
[    0.837164] PC is at amba_device_try_add+0xe8/0x268
[    0.842089] LR is at amba_device_try_add+0xcc/0x268
[    0.847031] pc : [<ffff0000084f5320>] lr : [<ffff0000084f5304>] pstate: 40000045
[    0.854489] sp : ffff00000806bbe0
[    0.857868] x29: ffff00000806bbe0 x28: ffff000009040588 
[    0.863246] x27: 0000000000000004 x26: 0000000000000000 
[    0.868622] x25: ffff8000defe5088 x24: 0000000000000000 
[    0.873999] x23: ffff00000944d000 x22: 0000000000001000 
[    0.879380] x21: ffff8000dc21a6f8 x20: 0000000000000000 
[    0.884752] x19: ffff8000dc21a400 x18: 0000000000000020 
[    0.890133] x17: 0000000000000001 x16: 00000000deadbeef 
[    0.895505] x15: ffffffffffffffff x14: ffffffffffffffff 
[    0.900882] x13: 0000000000000020 x12: 0101010101010101 
[    0.906258] x11: 0000000000000028 x10: 0101010101010101 
[    0.911635] x9 : 0000000000000000 x8 : ffff8000dc203d80 
[    0.917011] x7 : 0000000000000000 x6 : 000000000000003f 
[    0.922388] x5 : 0000000000000000 x4 : ffff0000091d4190 
[    0.927765] x3 : 0000000000000000 x2 : ffff00000944dfe0 
[    0.933141] x1 : 0000000000000000 x0 : 0000000000000000 
[    0.938519] Process swapper/0 (pid: 1, stack limit = 0xffff000008068000)
[    0.945285] Call trace:
[    0.947798] Exception stack(0xffff00000806baa0 to 0xffff00000806bbe0)
[    0.954304] baa0: 0000000000000000 0000000000000000 ffff00000944dfe0 0000000000000000
[    0.962196] bac0: ffff0000091d4190 0000000000000000 000000000000003f 0000000000000000
[    0.970091] bae0: ffff8000dc203d80 0000000000000000 0101010101010101 0000000000000028
[    0.977979] bb00: 0101010101010101 0000000000000020 ffffffffffffffff ffffffffffffffff
[    0.985869] bb20: 00000000deadbeef 0000000000000001 0000000000000020 ffff8000dc21a400
[    0.993761] bb40: 0000000000000000 ffff8000dc21a6f8 0000000000001000 ffff00000944d000
[    1.001653] bb60: 0000000000000000 ffff8000defe5088 0000000000000000 0000000000000004
[    1.009548] bb80: ffff000009040588 ffff00000806bbe0 ffff0000084f5304 ffff00000806bbe0
[    1.017435] bba0: ffff0000084f5320 0000000040000045 ffff00000806bbe0 ffff0000084f5304
[    1.025327] bbc0: ffffffffffffffff 00000000fffffffe ffff00000806bbe0 ffff0000084f5320
[    1.033221] [<ffff0000084f5320>] amba_device_try_add+0xe8/0x268
[    1.039201] [<ffff0000084f5588>] amba_device_add+0x18/0xe0
[    1.044762] [<ffff000008922fc8>] of_platform_bus_create+0x2b8/0x320
[    1.051082] [<ffff000008922e74>] of_platform_bus_create+0x164/0x320
[    1.057413] [<ffff0000089231a0>] of_platform_populate+0x70/0xd0
[    1.063404] [<ffff000008f8e218>] of_platform_default_populate_init+0x64/0x78
[    1.070513] [<ffff000008083980>] do_one_initcall+0x38/0x120
[    1.076150] [<ffff000008f40d0c>] kernel_init_freeable+0x188/0x22c
[    1.082305] [<ffff000008a82268>] kernel_init+0x10/0x100
[    1.087590] [<ffff000008084b58>] ret_from_fork+0x10/0x18
[    1.092969] Code: f9001fb8 8b0202e2 52800001 52800018 (b9400040) 
[    1.099148] ---[ end trace 0af73e04a0d75c0a ]---
[    1.103845] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.103845] 
[    1.113090] SMP: stopping secondary CPUs
[    1.117094] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.117094]
来自“https://www.mywiki.cn/free6d1823/index.php?title=Xen_on_Hikey960&oldid=44678”