What is the kernel die message
来自个人维基
2019年11月18日 (一) 19:54free6d1823（讨论 | 贡献）的版本
error
[ 3.975393] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 3.983179] ACPI: Interpreter disabled. [ 3.987577] xen:balloon: Initialising balloon driver [ 3.993418] vgaarb: loaded [ 3.996285] SCSI subsystem initialized [ 4.000379] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe [ 4.011114] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe [ 4.022176] usbcore: registered new interface driver usbfs [ 4.027621] usbcore: registered new interface driver hub [ 4.033089] usbcore: registered new device driver usb [ 4.038267] tcpc_class_init_1.1.1_G [ 4.041668] TCPC class init OK [ 4.044803] Init Richtek RegMap [ 4.048164] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe [ 4.059322] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe [ 4.070593] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe [ 4.082229] pps_core: LinuxPPS API ver. 1 registered [ 4.087107] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 4.096309] PTP clock support registered [ 4.100406] EDAC MC: Ver: 3.0.0 [ 4.103764] dmi: Firmware registration failed. [ 4.108673] Advanced Linux Sound Architecture Driver Initialized. [ 4.115421] clocksource: Switched to clocksource arch_sys_counter [ 4.121610] VFS: Disk quotas dquot_6.6.0 [ 4.125477] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.132505] pnp: PnP ACPI: disabled [ 4.141810] OF: /soc/thermal-zones/cls0/cooling-maps/map0: could not find phandle [ 4.149222] missing cooling_device property [ 4.153453] failed to build thermal zone cls0: -22 [ 4.158429] NET: Registered protocol family 2 [ 4.163203] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 4.170188] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 4.176711] TCP: Hash tables configured (established 4096 bind 4096) [ 4.183158] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 4.188981] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 4.195434] NET: Registered protocol family 1 [ 4.200083] RPC: Registered named UNIX socket transport module. [ 4.205905] RPC: Registered udp transport module. [ 4.210670] RPC: Registered tcp transport module. [ 4.215447] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.222903] kvm [1]: HYP mode not available [ 4.230588] audit: initializing netlink subsys (disabled) [ 4.236064] audit: type=2000 audit(3.879:1): state=initialized audit_enabled=0 res=1 [ 4.236300] workingset: timestamp_bits=44 max_order=17 bucket_order=0 [ 4.240582] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.241083] NFS: Registering the id_resolver key type [ 4.241107] Key type id_resolver registered [ 4.241108] Key type id_legacy registered [ 4.241116] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.241322] 9p: Installing v9fs 9p2000 file system support [ 4.244581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 4.244586] io scheduler noop registered [ 4.244709] io scheduler cfq registered (default) [ 4.244711] io scheduler mq-deadline registered [ 4.244713] io scheduler kyber registered [ 4.252770] pinctrl-single e896c000.pinmux: 124 pins at pa ffff0000094d5000 size 496 [ 4.252918] pinctrl-single ff37e000.pinmux: 6 pins at pa ffff0000094dd000 size 24 [ 4.253092] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffff0000094e5000 size 48 [ 4.253190] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffff0000094ed000 size 24 [ 4.253323] pinctrl-single fff11000.pinmux: 42 pins at pa ffff0000094f5000 size 168 [ 4.253544] pinctrl-single e896c800.pinmux: 128 pins at pa ffff0000094fd800 size 512 [ 4.253639] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffff000009505800 size 24 [ 4.253737] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffff00000950d800 size 24 [ 4.253844] pinctrl-single ff37e800.pinmux: 6 pins at pa ffff000009515800 size 24 [ 4.253980] pinctrl-single fff11800.pinmux: 47 pins at pa ffff00000951d800 size 188 [ 4.255454] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered [ 4.255670] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered [ 4.255867] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered [ 4.256056] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered [ 4.256258] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered [ 4.256445] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered [ 4.256644] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered [ 4.256828] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered [ 4.257021] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered [ 4.257213] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered [ 4.257407] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered [ 4.257598] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered [ 4.257804] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered [ 4.257993] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered [ 4.258181] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered [ 4.258371] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered [ 4.258556] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered [ 4.258745] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered [ 4.258965] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered [ 4.259155] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered [ 4.259354] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered [ 4.259570] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered [ 4.259788] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered [ 4.259980] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered [ 4.260176] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered [ 4.260381] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered [ 4.260570] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered [ 4.260766] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered [ 4.260953] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered [ 4.299454] OF: PCI: host bridge /soc/pcie@f4000000 ranges: [ 4.299474] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000 [ 5.311553] kirin-pcie f4000000.pcie: Link Fail [ 5.316161] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00 [ 5.322429] pci_bus 0000:00: root bus resource [bus 00-01] [ 5.327980] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff]) (XEN) physdev.c:16:d0v3 PHYSDEVOP cmd=25: not implemented (XEN) physdev.c:16:d0v3 PHYSDEVOP cmd=15: not implemented [ 5.348592] pci 0000:00:00.0: Failed to add - passthrough or MSI/MSI-X might fail! [ 5.356387] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff 64bit] [ 5.363614] pci 0000:00:00.0: PCI bridge to [bus 01] [ 5.368972] pcieport 0000:00:00.0: Signaling PME with IRQ 56 [ 5.374659] pcieport 0000:00:00.0: AER enabled with IRQ 56 [ 5.383977] k3-dma fdf30000.dma: initialized [ 5.390316] xen:xen_evtchn: Event-channel device installed [ 5.400879] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.409012] SuperH (H)SCI(F) driver initialized [ 5.413745] msm_serial: driver initialized [ 5.418960] [drm] +. [ 5.421164] [drm] wait for external HDMI bridge driver. [ 5.426629] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 5.437491] loop: module loaded [ 5.441064] [I/GPIO_HUB] gpio_hub_probe: step in [ 5.445820] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0 [ 5.453781] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 5.464496] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled [ 5.474968] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 5.485555] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled [ 5.518106] scsi host0: ufshcd [ 5.533914] libphy: Fixed MDIO Bus: probed [ 5.538332] tun: Universal TUN/TAP device driver, 1.6 [ 5.544160] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 5.549901] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.555927] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 5.562912] igb: Copyright (c) 2007-2014 Intel Corporation. [ 5.568576] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 5.576441] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 5.582678] sky2: driver version 1.30 [ 5.586475] xen_netfront: Initialising Xen virtual ethernet driver [ 5.592777] VFIO - User Level meta-driver version: 0.3 [ 5.598508] [USB3][hisi_dwc3_probe]+ [ 5.602221] [USB3][get_phy_param]eye diagram param: 0x1c466e3 [ 5.607883] [USB3][get_phy_param]eye diagram host param: 0x1c466e3 [ 5.614118] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80 [ 5.619578] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980 [ 5.625477] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5 [ 5.631057] [USB3][get_resource]this is asic platform (fpga flag 0) [ 5.637355] [USB3][create_attr_file]+ [ 5.640872] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 5.653853] [USB3][create_attr_file]- [ 5.657476] [USB3][hi3660_usb3phy_init]+ [ 5.687569] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device [ 5.695322] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80 [ 5.702961] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1 [ 5.708959] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5 [ 5.715461] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1 [ 5.722050] [USB3][hi3660_usb3phy_init]- [ 5.727502] [dwc3_otg_init]+ [ 5.730298] DWC3_OCFG: 0x0 [ 5.733070] DWC3_OCTL: 0x40 [ 5.735932] DWC3_OEVT: 0x80000000 [ 5.739307] DWC3_OEVTEN: 0x0 [ 5.742263] DWC3_OSTS: 0x1f [ 5.745122] DWC3_BCFG: 0x0 [ 5.747905] DWC3_BCEVT: 0x0 [ 5.750753] DWC3_BCEVTEN: 0x0 [ 5.753793] [dwc3_otg_init]- [ 5.756779] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add. [ 5.765855] [USB3][hisi_dwc3_wake_lock]usb otg wake lock [ 5.771097] [USB3][hisi_dwc3_probe]init state: OFF [ 5.775932] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1 [ 5.781740] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1 [ 5.782111] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2 [ 5.782118] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db [ 5.784429] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1 [ 5.784440] ufshcd-hi3660 ff3b0000.ufs: TX_EQUALIZER DB value lane1 = 0x1 [ 5.784446] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 5.826670] [USB3][hisi_usb_otg_event]event: 1 [ 5.831181] [USB3][hisi_dwc3_probe]- [ 5.831192] [USB3][event_work]+ [ 5.831194] [USB3][handle_event][handle_event] type: 1 [ 5.831196] [dwc3_otg_work]+ [ 5.831196] evt = 4 [ 5.831198] [dwc3_otg_stop_peripheral]+ [ 5.831200] [dwc3_otg_stop_peripheral]- [ 5.831201] [dwc3_suspend_device] + [ 5.831232] [dwc3_suspend_device] - [ 5.831233] [dwc3_otg_work]- [ 5.831234] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock [ 5.831238] [USB3][handle_event]hisi usb status: DEVICE -> OFF [ 5.831239] [USB3][event_work]- [ 5.881866] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.888310] ehci-pci: EHCI PCI platform driver [ 5.892851] ehci-platform: EHCI generic platform driver [ 5.898190] ehci-orion: EHCI orion driver [ 5.902234] ehci-exynos: EHCI EXYNOS driver [ 5.906478] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 5.912114] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.918313] ohci-pci: OHCI PCI platform driver [ 5.922844] ohci-platform: OHCI generic platform driver [ 5.928177] ohci-exynos: OHCI EXYNOS driver [ 5.932660] usbcore: registered new interface driver usb-storage [ 5.939398] [I/hisi_pd] pd_dpm_init [ 5.942941] [I/hisi_pd] pd_dpm_probe : +++++++++ [ 5.947561] [I/hisi_pd] pd_dpm_probe ++++ [ 5.947561] [ 5.953590] rt1711h_init (1.1.8_G): initializing... [ 5.958393] rt1711h node found... [ 5.962907] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0 [ 5.969836] i2c /dev entries driver [ 5.975063] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19 [ 5.982745] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19 [ 5.990528] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19 [ 5.998342] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19 [ 6.006135] hi3660_thermal fff30000.tsensor: failed to register thermal sensor4: -517 [ 6.014033] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19 [ 6.021826] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded [ 6.029081] cpu cpu0: failed to get clock: -2 [ 6.033359] cpufreq-dt: probe of cpufreq-dt failed with error -2 [ 6.039777] sdhci: Secure Digital Host Controller Interface driver [ 6.045865] sdhci: Copyright(c) Pierre Ossman [ 6.050444] Synopsys Designware Multimedia Card Interface Driver [ 6.056921] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated. [ 6.062939] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default [ 6.075269] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode. [ 6.082263] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller. [ 6.088533] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a [ 6.093956] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 47,32 bit host data width,256 deep fifo [ 6.103544] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO [ 6.129490] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 6.157077] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated. [ 6.163080] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 6.175311] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode. [ 6.182179] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller. [ 6.188450] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a [ 6.193859] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 48,32 bit host data width,256 deep fifo [ 6.204000] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.211267] ledtrig-cpu: registered to indicate activity on CPUs [ 6.218143] usbcore: registered new interface driver usbhid [ 6.223640] usbhid: USB HID core driver [ 6.228551] optee: probing for conduit method from DT. (XEN) d0v3 Unhandled SMC/HVC: 0xbf00ff01 [ 6.237244] optee: api uid mismatch [ 6.242123] NET: Registered protocol family 17 [ 6.246557] 9pnet: Installing 9P2000 support [ 6.250877] Key type dns_resolver registered [ 6.255777] registered taskstats version 1 [ 6.264765] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 12, base_baud = 0) is a PL011 rev2 [ 6.274244] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 13, base_baud = 0) is a PL011 rev2 [ 6.283153] serial serial0: tty port ttyAMA4 registered [ 6.288932] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022 [ 6.295941] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffff00000980d000 [ 6.304730] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1 [ 6.312353] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022 [ 6.319335] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffff000009815000 [ 6.328132] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3 [ 6.337169] rt1711_i2c_probe [ 6.339999] I2C functionality : OK... [ 6.345341] rt_parse_dt [ 6.347706] rt1711h_chipID = 0x2171 [ 6.351254] regmap_device_register: name = rt1711-4e [ 6.356310] rt_regmap_rt1711-4e: rt register cache data init [ 6.362094] rt_regmap_rt1711-4e: cache cata init successfully [ 6.368063] tcpc_device_register register tcpc device (type_c_port0) [ 6.374489] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK [ 6.381863] PD Timer number = 37 [ 6.385254] tcpci_timer_init : init OK [ 6.389057] pd_parse_pdata [ 6.391761] pd_parse_pdata src pdo data = [ 6.395826] pd_parse_pdata 0: 0x00019064 [ 6.399813] pd_parse_pdata snk pdo data = [ 6.403889] pd_parse_pdata 0: 0x000190c8 [ 6.407876] pd_parse_pdata 1: 0x0002d0c8 [ 6.411868] pd_parse_pdata id vdos data = [ 6.415941] pd_parse_pdata 0: 0xd00029cf [ 6.419929] pd_parse_pdata 1: 0x00000000 [ 6.423919] pd_parse_pdata 2: 0x00010000 [ 6.427910] dpm_caps: local_dr_power [ 6.431552] dpm_caps: local_dr_data [ 6.435101] dpm_caps: local_ext_power [ 6.438832] dpm_caps: local_usb_comm [ 6.442476] dpm_caps: local_usb_suspend [ 6.446378] dpm_caps: local_high_cap [ 6.450019] dpm_caps: local_give_back [ 6.453749] dpm_caps: local_no_suspend [ 6.457565] dpm_caps: local_vconn_supply [ 6.461558] dpm_caps: attemp_discover_cable_dfp [ 6.466150] dpm_caps: attemp_enter_dp_mode [ 6.470311] dpm_caps: attemp_discover_cable [ 6.474561] dpm_caps: attemp_discover_id [ 6.478550] dpm_caps: pr_reject_as_source [ 6.482626] dpm_caps: pr_reject_as_sink [ 6.486528] dpm_caps: pr_check_gp_source [ 6.490518] dpm_caps: pr_check_gp_sink [ 6.494332] dpm_caps: dr_reject_as_dfp [ 6.498148] dpm_caps: dr_reject_as_ufp [ 6.501965] dpm_caps: snk_prefer_low_voltage [ 6.506300] dpm_caps: snk_ignore_mismatch_current [ 6.511076] dpm_caps = 0xc010c10b [ 6.514452] [I/hisi_pd] PE:pd_core_init [ 6.518735] rt1711_init_alert name = type_c_port0 [ 6.523349] rt1711_init_alert gpio # = 291 [ 6.527523] GPIO requested... [ 6.530576] rt1711_init_alert : IRQ number = 93 [ 6.535134] rt1711_init_alert : irq initialized... [ 6.540079] IRQF_NO_THREAD Test [ 6.545345] [I/hisi_pd] TPC-I:typec_init: DRP [ 6.550116] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0 [ 6.557242] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1 [ 6.563052] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1 [ 6.569210] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub [ 6.575102] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2 [ 6.580911] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2 [ 6.587069] [USB3][hisi_usb_otg_event]event: 2 [ 6.591589] [I/hisi_pd] TPC-I:** Unattached.SNK [ 6.591599] [USB3][event_work]+ [ 6.591601] [USB3][handle_event][handle_event] type: 2 [ 6.591604] [USB3][set_vbus_power]set port power 1 [ 6.591607] [dwc3_otg_work]+ [ 6.591607] evt = 2 [ 6.591608] [dwc3_resume_device] + [ 6.591739] [dwc3_resume_device] - [ 6.591740] [dwc3_otg_start_host]+ [ 6.592059] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.592071] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 6.592417] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 [ 6.592455] xhci-hcd xhci-hcd.0.auto: irq 90, io mem 0xff100000 [ 6.593039] hub 1-0:1.0: USB hub found [ 6.593081] hub 1-0:1.0: 1 port detected [ 6.593341] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.593347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 6.593439] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.593945] hub 2-0:1.0: USB hub found [ 6.593974] hub 2-0:1.0: 1 port detected [ 6.594217] [dwc3_otg_start_host]- [ 6.594218] [dwc3_otg_work]- [ 6.594220] [USB3][hisi_dwc3_wake_lock]usb otg wake lock [ 6.594223] [USB3][handle_event]hisi usb_status: OFF -> HOST [ 6.594224] [USB3][event_work]- [ 6.710898] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++ [ 6.718363] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!----------- [ 6.726066] tcpc_device_irq_enable : tcpc irq enable OK! [ 6.726947] [I/hisi_pd] TPC-I:[CC_Alert] 5/5 [ 6.726951] [I/hisi_pd] TPC-I:** AttachWait.SNK [ 6.740385] rt1711_i2c_probe probe OK! [ 6.745596] [drm] +. [ 6.747822] [drm] wait for external HDMI bridge driver. [ 6.754353] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated. [ 6.760368] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 6.772609] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode. [ 6.779383] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller. [ 6.785738] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a [ 6.791120] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 48,32 bit host data width,128 deep fifo [ 6.800647] mmc_host mmc1: card is non-removable. [ 6.846996] [I/hisi_pd] TPC-I:[CC_Change] 5/5 [ 6.851357] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++ [ 6.858809] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!----------- [ 6.866268] [I/hisi_pd] TPC-I:** Custom.SRC [ 6.870607] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success [ 6.870612] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change [ 6.885344] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3 [ 6.891153] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3 [ 6.897318] [USB3][hisi_usb_otg_event]event: 3 [ 6.901832] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0 [ 6.901838] [USB3][event_work]+ [ 6.901841] [USB3][handle_event][handle_event] type: 3 [ 6.901842] [USB3][set_vbus_power]set port power 0 [ 6.901845] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK [ 6.901848] [I/hisi_pd] pd_dpm_report_bc12 : event (4) [ 6.901850] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++ [ 6.901851] [dwc3_otg_work]+ [ 6.901851] evt = 1 [ 6.901853] [dwc3_otg_stop_host]+ [ 6.901902] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 6.901914] usb usb2: USB disconnect, device number 1 [ 6.905481] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 6.924031] [drm] +. [ 6.924059] [drm] wait for external HDMI bridge driver. [ 6.924940] input: keys as /devices/platform/keys/input/input0 [ 6.926540] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 6.926776] ALSA device list: [ 6.926777] No soundcards found. [ 6.927092] [drm] +. [ 6.927100] [drm] wait for external HDMI bridge driver. [ 6.930712] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range [ 6.935443] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 6.935448] usb 1-1: hub failed to enable device, error -108 [ 6.942513] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 6.945677] mmc1: new SDIO card at address 0001 [ 7.038410] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0 [ 7.038412] [USB3][hisi_usb_otg_event]event: 0 [ 7.038425] [I/hisi_pd] TPC-I:Attached-> CUSTOM_SRC [ 7.038428] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++ [ 7.038430] [I/hisi_pd] pd_dpm_handle_pe_event can not detect typec state [ 7.038432] [I/hisi_pd] pd_dpm_set_typec_state = 0 [ 7.038433] [I/hisi_pd] [TCPC-I]usb_port_attached [ 7.295448] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11 [ 7.692053] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 7.697638] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 7.702752] usb usb1: USB disconnect, device number 1 [ 7.728055] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 7.733689] [dwc3_otg_stop_host]- [ 7.736999] [dwc3_suspend_device] + [ 7.740575] [dwc3_suspend_device] - [ 7.744112] [dwc3_otg_work]- [ 7.747053] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock [ 7.752793] [USB3][handle_event]hiusb_status: HOST -> OFF [ 7.758251] [USB3][handle_event][handle_event] type: 0 [ 8.075421] [USB3][detect_charger_type]DCD done [ 8.107421] [USB3][detect_charger_type]Primary Detection done [ 8.113069] [USB3][detect_charger_type]Secondary Detection done [ 8.143422] [USB3][detect_charger_type]type: 0 [ 8.147770] [I/hisi_pd] pd_dpm_report_bc12 : event (0) [ 8.152970] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++ [ 8.160777] [dwc3_otg_work]+ [ 8.160777] evt = 3 [ 8.160780] [dwc3_resume_device] + [ 8.169559] [dwc3_resume_device] - [ 8.172916] [dwc3_otg_start_peripheral]+ [ 8.176904] [dwc3_otg_start_peripheral]- [ 8.180892] [dwc3_otg_work]- [ 8.183841] [USB3][hisi_dwc3_wake_lock]usb otg wake lock [ 8.189219] [USB3][handle_event]hisi usb status: OFF -> DEVICE [ 8.195116] [USB3][event_work]- [ 8.198323] [USB3][event_work]+ [ 8.201535] [USB3][event_work]- [ 8.832523] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11 [ 10.368494] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11 [ 10.377967] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 3, failed with error -11 after 3 retires [ 11.904492] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11 [ 13.440491] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11 [ 14.976486] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, index 0, err = -11 [ 14.986824] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 8, desc_index 0, param_offset 0, ret -11 [ 14.999402] ufshcd-hi3660 ff3b0000.ufs: ufshcd_init_icc_levels: Failed reading power descriptor.len = 98 ret = -11 [ 36.480911] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 36.493893] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - issue time 14654581 us [ 36.500491] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Transfer Request Descriptor phys@0xdf058000 [ 36.509083] UPIU TRD: 00000000: 15000000 00000000 0000000f 00000000 [ 36.515407] UPIU TRD: 00000010: df040000 00000000 00800080 01000001 [ 36.521740] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Request UPIU phys@0xdf040000 [ 36.529022] UPIU REQ: 00000000: 00d04001 00000000 00000000 24000000 [ 36.535352] UPIU REQ: 00000010: 00000012 00000024 00000000 00000000 [ 36.541685] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - Response UPIU phys@0xdf040200 [ 36.549054] UPIU RSP: 00000000: 00000000 00000000 00000000 00000000 [ 36.555383] UPIU RSP: 00000010: 00000000 00000000 00000000 00000000 [ 36.561718] UPIU RSP: 00000020: 00000000 00000000 00000000 00000000 [ 36.568042] UPIU RSP: 00000030: 00000000 [ 36.572036] ufshcd-hi3660 ff3b0000.ufs: UPIU[0] - PRDT - 1 entries phys@0xdf040400 [ 36.579753] UPIU PRDT: 00000000: db939600 00000000 00000000 00000023 [ 36.728730] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2 [ 36.735247] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db [ 36.743489] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1 [ 36.750709] ufshcd-hi3660 ff3b0000.ufs: TX_EQUALIZER DB value lane1 = 0x1 [ 36.757552] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 36.769752] VFS: Cannot open root device "sdd10" or unknown-block(0,0): error -6 [ 36.777071] Please append a correct "root=" boot option; here are the available partitions: [ 36.785478] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 36.793786] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 4.14.0-rc7-linaro-hikey960+ #2 [ 36.802802] Hardware name: HiKey960 (DT) [ 36.806789] Call trace: [ 36.809316] [<ffff000008088be0>] dump_backtrace+0x0/0x370 [ 36.814770] [<ffff000008088f64>] show_stack+0x14/0x20 [ 36.819887] [<ffff000008a72780>] dump_stack+0x9c/0xbc [ 36.825003] [<ffff0000080c78d8>] panic+0x11c/0x28c [ 36.829861] [<ffff000008f41158>] mount_block_root+0x190/0x264 [ 36.835667] [<ffff000008f41348>] mount_root+0x11c/0x134 [ 36.840962] [<ffff000008f41498>] prepare_namespace+0x138/0x180 [ 36.846854] [<ffff000008f40d8c>] kernel_init_freeable+0x208/0x22c [ 36.853013] [<ffff000008a84c68>] kernel_init+0x10/0x100 [ 36.858301] [<ffff000008084b58>] ret_from_fork+0x10/0x18 [ 36.863683] SMP: stopping secondary CPUs [ 36.867703] Kernel Offset: disabled [ 36.871221] CPU features: 0x082004 [ 36.874688] Memory Limit: none [ 36.877816] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
